| Author | Topic |
|---|
Location:
Pine Rivers QLD
Registered:
April 2005
|
|
Re: soarer speedo wiring
|
Sun, 11 December 2005 11:33
 
|
 |
try it and find out, i think they should be green, red, and some other colour, it should also be pretty obvious that if these wires in the center console (being where the shifter is???) are right there should be a hole for the wires to get to the gearbox.
there should also be two wires off the box for the revers switch too, this should be a simple open/close switch.
On the lines of the speed sensor, i think it is a type of hall effect sensor or something, so it shouldn't brake anything if your wrong. I wired a 1JZ into a z20 but unfortunately the gearbox was the only thing i didn't get around to wiring, so this is about all the info i can give you, but i say give it a go.
I am also not liable for any damage even though there should be none 
|
|
|
| | Subject | Poster | Date |
|---|
 |
soarer speedo wiring
|
Rossco | Sat, 10 December 2005 11:48 |
|
Re: soarer speedo wiring
|
ndgcpr | Sun, 11 December 2005 11:33 |
|
Re: soarer speedo wiring
|
BlackSupra | Mon, 12 December 2005 11:28 |
|
Re: soarer speedo wiring
|
Rossco | Mon, 12 December 2005 12:02 |
|
Re: soarer speedo wiring
|
BlackSupra | Mon, 12 December 2005 12:08 |
|
Re: soarer speedo wiring
|
ndgcpr | Mon, 12 December 2005 12:11 |
|
Re: soarer speedo wiring
|
ndgcpr | Mon, 12 December 2005 12:10 |
|
Re: soarer speedo wiring
|
CrUZsida | Mon, 12 December 2005 23:15 |
