| Author | Topic |
|---|
Location:
Western Sydney
Registered:
May 2002
|
|
Re: 2TGEU TPS? problems
|
Thu, 13 June 2002 10:59
 
|
 |
|
Playing with the throttle won't damage the TPS. The three terminals on the TPS will be IDL(idle), PSW(full throttle) and a power source. Your TPS is obviously getting power because your prob is sorted when you unplug it. When I wired my 18R-G up, I connected the TPS the wrong way around and had exactly the same problem as you. If you've got a diagram, use it to find the IDL and PSW wires. They should be the two outside pins on the TPS. Remove the pins and swap them around or just chop them and solder them the other way around. 90% guarantee this will fix your problem. If there are a few different ECUs for the 2TG, then maybe the ECU pin layouts are slightly different causing your TPS to be wired the wrong way around.
|
|
|
