| Author | Topic |
|---|
Location:
Melbourne
Registered:
February 2003
|
|
Re: 1JZ GTE Igniter wiring
|
Mon, 03 March 2003 12:12
 
|
 |
|
The crank sensor is wired so that it curves negative, then has a sharp rise to positive, then curves back to zero. The yellow is the one that I fed into the computer, and the red was connected to the earth in the ignition loom. On the other side of the connector, red becomes BL/Green, and Yellow becomes Bl/Yell. I don't know why this would be, maybe I am not using the right connector. On the TPS, I used Brown, Yell and Bl/Red. The red I left disconnected. It seems to be a position switch that is used to detect a position for some reason. For some reason I didn't write down the cam sensor polarity. I will sort that out tomorrow, perhaps.
|
|
|
| | Subject | Poster | Date |
|---|
 |
1JZ GTE Igniter wiring
|
jbrough | Fri, 21 February 2003 03:21 |
|
Re: 1JZ GTE Igniter wiring
|
mrshin | Fri, 21 February 2003 07:40 |
|
Re: 1JZ GTE Igniter wiring
|
gianttomato | Fri, 21 February 2003 07:48 |
|
Re: 1JZ GTE Igniter wiring
|
draven | Fri, 21 February 2003 09:18 |
|
Re: 1JZ GTE Igniter wiring
|
jbrough | Fri, 21 February 2003 09:24 |
|
Re: 1JZ GTE Igniter wiring
|
draven | Fri, 21 February 2003 09:27 |
|
Re: 1JZ GTE Igniter wiring
|
jbrough | Fri, 21 February 2003 09:35 |
|
Re: 1JZ GTE Igniter wiring
|
draven | Fri, 21 February 2003 13:01 |
|
Re: 1JZ GTE Igniter wiring
|
jbrough | Sat, 22 February 2003 10:06 |
|
Re: 1JZ GTE Igniter wiring
|
draven | Sat, 22 February 2003 11:35 |
|
Re: 1JZ GTE Igniter wiring
|
jbrough | Sun, 23 February 2003 23:23 |
|
Re: 1JZ GTE Igniter wiring
|
jbrough | Sat, 01 March 2003 12:58 |
|
Re: 1JZ GTE Igniter wiring
|
Dabbid | Mon, 03 March 2003 08:19 |
|
Re: 1JZ GTE Igniter wiring
|
ed_ma61 | Mon, 03 March 2003 10:59 |
|
Re: 1JZ GTE Igniter wiring
|
jbrough | Mon, 03 March 2003 12:12 |
|
Re: 1JZ GTE Igniter wiring
|
justcallmefrank | Mon, 03 March 2003 10:51 |
