Location: QLD - Sunshine Coast
Registered: July 2002
Re: ae92 rear drum to disc conversion
Thu, 06 March 2003 21:10
You will also need the two rearmost suspension arms which run from the crossmember to the hub carrier / upright. These two arms use a different bush in the SX to that of the CS etc. The other two suspension arms
With the SX arms it'll all bolt straight up.
Otherwise you can get a larger bush made up (I believe Fulcrum have done this in Brisbane twice now for this exact conversion) to go into the hub carrier to suit the CS suspension arms. I am told this costs about $75~80 just for the bushes. Jason Purcell is one person who's had it made up so try contacting him (I think he spends more time on the twincam16.com forums than here).
Haggis,
The rear hub carriers that you picked up - did they have all the ABS sensors etc in them. I am chasing a set of AE92 Levin GTZ (4AGZE engined) rear hub carriers / hubs WITH the ABS stuff so I can try to adapt the ABS to my car, just for fun .
Where did you pick them up from?
Do you know of any more floating around down your way as I have just about exhausted all possibilities up here?
Thu, 06 March 2003 21:10
.
