F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 7MGTE oil cooler hose size? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
SUPRAGTE Forums Junkie Location: North Sydney Registered: May 2002	Re: 7MGTE oil cooler hose size? Fri, 07 March 2003 01:27 Yeah thats exactly what I thought to ed. I saw rays factory oil cooler and saw the lines going to it and the diameter of the actual cooler pipes with the fins on it and it definitly appeared to be bigger than 3/8ths. I thought at least half inch looking at it. But when i put this 3/8th oil cooler hose over the sump return it fitted nice and tight, and also for the supply to the cooler from behind the oil filter. I tested the cooler, it get to like 45-50c after drving for an hour, doesn't feel like its flowing properly cause it should be closer to 85c as the coolant temp is. Its not flowing properly but I tested it with just water and it flowed very well, considering oil is thicker it should still flow well and get quite hot but its not. Anyone know if there is an oil thermostat in the block or oil cooler adaptor to open up at hot oil temps? [Report message to a moderator]

	Subject	Poster	Date
	7MGTE oil cooler hose size?	SUPRAGTE	Tue, 04 March 2003 08:31
	Re: 7MGTE oil cooler hose size?	knackers	Tue, 04 March 2003 08:45
	Re: 7MGTE oil cooler hose size?	SUPRAGTE	Tue, 04 March 2003 09:13
	Re: 7MGTE oil cooler hose size?	ed_ma61	Tue, 04 March 2003 09:41
	Re: 7MGTE oil cooler hose size?	SUPRAGTE	Tue, 04 March 2003 10:20
	Re: 7MGTE oil cooler hose size?	SUPRAGTE	Wed, 05 March 2003 09:52
	Re: 7MGTE oil cooler hose size?	ed_ma61	Wed, 05 March 2003 11:28
	Re: 7MGTE oil cooler hose size?	SUPRAGTE	Fri, 07 March 2003 01:27
	Re: 7MGTE oil cooler hose size?	ed_ma61	Fri, 07 March 2003 05:03
	Re: 7MGTE oil cooler hose size?	SUPRAGTE	Fri, 07 March 2003 05:26
	Re: 7MGTE oil cooler hose size?	ed_ma61	Fri, 07 March 2003 05:38
	Re: 7MGTE oil cooler hose size?	7mgte83	Tue, 22 April 2003 00:26
	Re: 7MGTE oil cooler hose size?	gianttomato	Tue, 22 April 2003 02:05

Previous Topic:	What are the costs and dificulties of a 4afc to 4age conversion?
Next Topic:	which motor.... please help

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.