| Author | Topic |
|---|
Location:
Sydney
Registered:
July 2002
|
|
Re: 1UZ-FE Flywheel / Clutch
|
Fri, 14 March 2003 02:51
 
|
 |
Congrats on building a lambo! They're great. Are you going to Canberra this weekend for the italian cars meet? David White (white carbontech lambo) is going down, I was gonna go with him, but my water pump needs attention.
Nick usually knows his stuff. He made me a bellhousing to go to my box, but then I told him I had a R154 Supra Turbo box instead. He gracefully refuned my money.
Ended up getting a Dellhousing, which was 15mm short (no shit)! I had to make a spacer out of my old 7M bellhousing and get longer bolts. Dellow Automotive are not the nicest people in the world at all. Bunch of bastards.
As for the flywheel, I used my racing flywheel and twin plate clutch that came with the car. I got the ring-gear from the 1UZ's torque converter heat shrunk onto my flywheel, then got it ballanced. Cost me $200 from memory ($150 for drilling new holes and shrinking ringear, $50 for ballancing).
Another thing to note is that I used the spacer that came with the 1UZ's torque converter. Its got the 8 bolt holes in it, and is about 3mm thick. I had to use it so the bolts would bite long enough.
Dellow Automotive also do the thrust race and that sort of thing. It comes as a kit, but you can draw a line through bits you don't need (I didn't need flywheel, clutch, or a hole cut out of the bellhousing as the slave cylinder for my clutch is inside the bellhousing - no fork).
I thought the Carbontech replicas were using an Alfa gearbox? I know they use Supra tailshafts (diff to wheels).
|
|
|
| | Subject | Poster | Date |
|---|
 |
1UZ-FE Flywheel / Clutch
|
digitalts | Thu, 13 March 2003 08:48 |
|
Re: 1UZ-FE Flywheel / Clutch
|
suprav8 | Thu, 13 March 2003 09:36 |
|
Re: 1UZ-FE Flywheel / Clutch
|
mrshin | Thu, 13 March 2003 10:20 |
|
Re: 1UZ-FE Flywheel / Clutch
|
biased99 | Thu, 13 March 2003 13:42 |
|
Re: 1UZ-FE Flywheel / Clutch
|
gianttomato | Thu, 13 March 2003 13:51 |
|
Re: 1UZ-FE Flywheel / Clutch
|
digitalts | Thu, 13 March 2003 21:05 |
|
Re: 1UZ-FE Flywheel / Clutch
|
SupraPete | Fri, 14 March 2003 02:51 |
|
Re: 1UZ-FE Flywheel / Clutch
|
digitalts | Fri, 14 March 2003 03:02 |
|
Re: 1UZ-FE Flywheel / Clutch
|
SupraPete | Fri, 14 March 2003 03:18 |
|
Re: 1UZ-FE Flywheel / Clutch
|
digitalts | Fri, 14 March 2003 03:31 |
|
Re: 1UZ-FE Flywheel / Clutch
|
SupraPete | Fri, 14 March 2003 03:49 |
|
Re: 1UZ-FE Flywheel / Clutch
|
digitalts | Fri, 14 March 2003 04:01 |
|
Re: 1UZ-FE Flywheel / Clutch
|
SupraPete | Fri, 14 March 2003 04:08 |
