| Author | Topic |
|---|
Location:
aiken, SC
Registered:
March 2003
|
|
Re: 1g-gte internals?
|
Mon, 17 March 2003 22:35
 
|
 |
where do you get heavy ma70, my car weighs less than 800 lbs right now  i have to drop in the engine , lexan windows, fuel cell, and one peice CF front end. this car will be a rocket with any engine in it  and should have close to a 50/50 weight dis. which i'll tweak when i get it almost done. granted it will have less torque before spool but i'm going up in the RPM's so i think that should make up for the loss of displacement and i'll have a much wider powerband, i still have to get the engine so i can do the calculations on that to be 100% sure. i called Weisco about some custom pistons, i'll just go that route, custom rods should be easy i just didn't want to have to go through all the trouble of doing it all custom. a GA70 1G-GTE front clip is about 1/4 the price of a JZA70 1JZ front clip and 1/10 the price of a JZA80 2JZ clip, so after i build up the bottom end it'll still be cheaper that a stock 1JZ and i get to say i have a 1G  . To be differant i did think about alot of toyo engine, i was going to do the 3M but finding one would be a problem  thanks for all your help anyway. -Kyle
[Updated on: Mon, 17 March 2003 22:36]
|
|
|
