Author | Topic |
Location: Perth
Registered: October 2002
|
Re: 1JZ conversion
|
Wed, 19 March 2003 10:05
|
|
The Toy Shop sells JZX-91 half-cuts for $3,500
FMIC and 3" exhaust will add another $3,000 at least.
Fuel pump and RRFPR about $200
Then you'll want to think about a boost controller, guage and BOV - at least another $500
The 1JZGTE ECU's are supposed to be pretty good - though adding an Apexi S-AFC II would improve things a lot - $1,000 fitted.
Probably need a new fuel pump and surge tank - $700
You'll need to have the tailshaft modded as well as engine mounts and X-member modding.
Then freshen the engine with timing belt, fluids, etc.
Then you're really going to need to upgrade brakes and maybe suspension too
Apparently wiring in the autobox is a PITA - but still it is a lot cheaper than going manual with a W-58.
And engineering can add up to $2,000
So, even doing all the work yourself - it is a pretty expensive conversion. BUT if you do it well, you will have an AWESOME car that flies down the freeways!
With intake and exhaust mods and boost turned up to 12psi, you should make somewhere around 220rwkw. Not bad for the old Cressi!
Good luck,
Justin
JZA-61 in the making
|
|
|
| Subject | Poster | Date |
|
1JZ conversion
|
1JZDRIFTER | Wed, 19 March 2003 06:11 |
|
Re: 1JZ conversion
|
sideshow | Wed, 19 March 2003 08:16 |
|
Re: 1JZ conversion
|
Celia-Sue | Wed, 19 March 2003 10:05 |
|
Re: 1JZ conversion
|
sideshow | Wed, 19 March 2003 10:19 |
|
Re: 1JZ conversion
|
draven | Wed, 19 March 2003 11:37 |
|
Re: 1JZ conversion
|
celicamad | Wed, 19 March 2003 12:41 |
|
Re: 1JZ conversion
|
1jzmx83 | Thu, 20 March 2003 00:15 |
|
Re: 1JZ conversion
|
celicamad | Thu, 20 March 2003 11:31 |
|
Re: 1JZ conversion
|
Southo | Thu, 27 March 2003 05:19 |
|
Re: 1JZ conversion
|
MX73-1JZ | Fri, 28 March 2003 04:08 |
|
Re: 1JZ conversion
|
sideshow | Fri, 28 March 2003 06:35 |
|
Re: 1JZ conversion
|
sideshow | Fri, 28 March 2003 06:35 |
|
Re: 1JZ conversion
|
Browndog | Sat, 29 March 2003 09:35 |
|
Re: 1JZ conversion
|
Norbie | Sun, 30 March 2003 13:13 |
|
Re: 1JZ conversion
|
cressidamods | Wed, 23 February 2005 03:14 |
|
Re: 1JZ conversion
|
CrUZsida | Wed, 23 February 2005 03:32 |
Current Time:
Thu Jan 2 05:24:34 UTC 2025 |
Total time taken to generate the page: 0.0084900856018066 seconds |