| Author | Topic |
|---|
Location:
Brisbane
Registered:
May 2002
|
|
Re: RA65 Suspension Upgrades
|
Mon, 24 March 2003 03:14
 
|
 |
The IRS subframe is attached to the floorpan with 4 big bolts. Basically you disconnect the tailshaft and brake lines, undo the 4 bolts, and the whole subframe drops out. Swap in the Supra subframe, re-connect everything, and you're done! It would be a very straightforward job for a suspension shop.
As for brakes, you may need to get rid of the proportioning valve for the drums when you convert to rear discs... not sure on the specifics with that though. You may also need to change the master cylinder?
|
|
|
