Author | Topic |
Location: Melbourne
Registered: May 2002
|
Re: Wheel Alignment - Has anyone here had this problem - upgrading from 15-17 inch
|
Thu, 27 March 2003 23:42
|
|
OK - GOING NUTS was me over the last 2-3 days-
UPDATE:
Wednesday - I took The Veinta to The place who originally installed my Tyres and GTP's they did a Wheel Alignment - thing is they wheel alligned it for a 97 Vienta wide Body) Where Mine is the model after. I though hmm pretty stopid but at least that must be the problem------- They alligned to the correct modem - same thing -
So CrackeD da Shits and said imill be back in 2-3 hoiusr expect it to be fixed - came back after they were still test driving it- sTILL NOT FIXEd-------Basically the Camber cannot be adjusted on these cars.
Next I went to BOb Jane they advised to do a whell alignment and install a Camber Bolt - so I booked it for the next day.
MEanwhile I wanted a further Opinion so I went to TyrePower the guy there blamed my new Firenza Tyres - said try diff ones - I went back and tried some Sava's same problem. The guys at TTF were VERRY Help full - and came to a conclusion something might be bent.
BOb jane did there recomendation - but SAME Problem drift to the left but no steering movement - Today i went back and alligner took me for a drie in my car to test drive it said its normal due to the roads and having wider tyres. At least now the steering doesnt move.
I might just go to Pedders and do a Front end check make sure the Conrol arm is not bent etc. just to be sure.
By the way the car looks so great I really shuld post a pic of it soon.
|
|
|