| Author | Topic |
|---|
Location:
cambo
Registered:
May 2002
|
|
Re: Haltech + 4AGZE
|
Tue, 01 April 2003 06:46
 
|
 |
im such a spaz for playing with it in the first place, shoulda saved file already in the car dammit! but how could it magically run good after i put it in the new sprinter when nothing changed? wierd. and yes its impossible to run it from base settings but i didnt know that at the time.
in regards to the ignitor module, its a haltech one if im on the right track as to what your talking about. it connects to the crank angle sensor and the main computer. its a little box that says haltech. if i had a digi cam id take a pic but ohwell.
Oz_Craig: yes thats the one, i picked it up for $3000 which i was pretty happy with considering the work done to it. some things are quite rough tho and its cost me a bit more than i thought it would. sily me thought it would just swap over for little cost because it was already in a sprinter. 
so im gonna need to get it professionaly tuned... can anyone reccomend a decent place that aint too expensive cause damn this thing is eating up my huge apprentice pay packet 
should i get the front mount fitted first then get it tuned or would it make little difference.
thanks for your help guys!!!
|
|
|
