| Author | Topic |
|---|
Location:
N.S.W
Registered:
May 2002
|
|
Re: GZE into AE82. Speedo & tacho help
|
Sun, 06 April 2003 02:44
 
|
 |
Both speedo and tacho can be made to work.
Speedo - Just take the electronic speedo drive off the gearbox and swap it over with a mechanical one, then just simply put your cable back in. I think the old mechanical one on your box should fit, not 100% sure on that one though.
Tacho - Need to get a converter box. Some people on here sell them.
As for changing to a twincam dash, think you mean cluster?? I think it would be a good idea. Because the carby clusters dont have a check engine light (good for diagnostics). Also I pulled one out of my seca wreck to have a look and it doesnt have a speed sensor on the speedo. I dont know how not having the speed sensor wire hooked up on a gze effects it. I think the check engine light stays on, But if you have a 4ac cluster then you want see it, since you dont have a check engine light 
Another thing is, i plug a carby cluster into my gze, let it run for ages and ages, let thermo kicked in, and the temp gauge read 1/4
Then I plugged a Twincam cluster in and let it run, let thermo kick in, and temp gauge says 1/2. So I THINK the temp gauges are calibrated differently.
So yeh, prob a good idea to get the twincam cluster.
[Updated on: Sun, 06 April 2003 02:54]
|
|
|
