F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 1JZ Torque Converter.... Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
ChuckLandwehr Forums Junkie Location: Canberra Registered: May 2002	Re: 1JZ Torque Converter.... Sun, 06 April 2003 06:34 Hey Freebles, you have an inspection cover at the bottom of gearbox bell housing, remove plastic/ rubber bung, use a socket on the crankshaft at front of the engine, rotate engine then tighten up the first bolt turn and do the next 1 from memory 6 to 8 bolts these hold the torque converter to the flex plate. While you are doing all this examine the flex plate for signs of cracking( they do Sometimes) check the welds at the flexplate to ring gear joints. If you still have problems give me a call( 62961305) [Report message to a moderator]

	Subject	Poster	Date
	1JZ Torque Converter....	frebbles	Thu, 03 April 2003 23:12
	Re: 1JZ Torque Converter....	biased99	Thu, 03 April 2003 23:23
	Re: 1JZ Torque Converter....	frebbles	Fri, 04 April 2003 13:27
	Re: 1JZ Torque Converter....	biased99	Fri, 04 April 2003 14:35
	Re: 1JZ Torque Converter....	biased99	Sat, 05 April 2003 00:09
	Re: 1JZ Torque Converter....	MzSoarer	Sat, 05 April 2003 00:31
	Re: 1JZ Torque Converter....	frebbles	Sat, 05 April 2003 06:38
	Re: 1JZ Torque Converter....	inertia	Sat, 05 April 2003 12:29
	Re: 1JZ Torque Converter....	frebbles	Sat, 05 April 2003 23:19
	Re: 1JZ Torque Converter....	ChuckLandwehr	Sun, 06 April 2003 06:34

Previous Topic:	Difference bet TA23 - RA23
Next Topic:	3sg help

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.