| Author | Topic |
|---|
I supported Toymods
Location:
melbourne.victoria.austra...
Registered:
June 2002
|
|
Re: Ke55 auto to manual conversion
|
Sun, 06 April 2003 21:02
 
|
 |
i did this several years ago with mine. you have to replace the pedal box with a manual pedal box, you need a K50 gearbox to go on the back (and flywheel, clutch assy, clutch cable ect)
the problem i found was the mounts on my auto ke55 were in the wrong place for the manual gearbox - they were about 1" too far forward so i used a ke20/ta22 gearbox crossmember and bolted that in place.
also you need a manual tailshaft to go in, and, i also had to modify where the stick comes thru the floor from memory i had to trim about 1" towards the front of the car off.
|
|
|
