Toymods Car Club Inc: Tech & Conversions => Supercharging an 18R-GEU

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » Supercharging an 18R-GEU Show: Today's Posts :: Show Polls Email to friend

Author

Topic

crostek
Regular

I supported Toymods

Location:
Oyster bay NSW
Registered:
May 2002

Re: Supercharging an 18R-GEU	Sun, 06 April 2003 23:48

as M.W.P said "Bottom end will be fine... An aftermarket ECU is always a good thing... Better spark... dont bother...." For pulleys to drive the blower get a set of a 2Y hilux motor, has ribbed belt. mounts for blower you can use the aircon bracket on the side on the head, or try and mount it low else were. The throttle body will have to be put in the intake of the blower. Motor should be fine up to 5psi if you have a low comp 18RGUE. and that should give you your 120RWKW. You will have to fit a Higher pressure pump (VL turbo) and a fuel reg that will handle boost pressure, so your injectors still work fine. If you go over 5psi you will need to change injectors and Definitely get and after market ECU. [Report message to a moderator]

Current Time: Sat Feb 1 04:47:11 UTC 2025

Total time taken to generate the page: 0.0054500102996826 seconds

.:: Contact :: Home ::.