| Author | Topic |
|---|
Location:
Sydney
Registered:
July 2002
|
|
Re: Cams wanted for 7MGTE
|
Thu, 10 April 2003 15:12
 
|
 |
[quote title=gianttomato wrote on Thu, 10 April 2003 15:19
Your standard computer should cope with cams of up to 270 degrees advertised duration. However, your valve springs will not tolerate in excess of 8.5 or 9 mm lift - they will be coil bound (speak to Ed ma61 - he has done tonnes of research on this, or Stenno, who actually has some TRD 7MGTE cams, valve springs and shim under bucket setup for sale). So if you want more lift, you'll need new valve springs. If you go for more than 9 mm lift you'll also need to go shim under bucket. That'll set you back another $1000. However, does your head flow enough to support cam lift of greater than standard lift? Have you had the head on a flow bench? If Toyota follow tradition, the exhaust side will flow like a blocked intestine. If you have not done any work to remedy this, increasing lift will be a waste of time. So then you need to whip the head off and get it ported. Another lazy K.
[/quote]
So can I get some conformation on these 7MGTE TRD cams that Stenno has please ??
Is it true they wont fit straight into my 7MGTE head without further work ?? ed_ma61 ???
|
|
|
| | Subject | Poster | Date |
|---|
 |
Cams wanted for 7MGTE
|
SUPRA MAN | Thu, 10 April 2003 02:59 |
|
Re: Cams wanted for 7MGTE
|
SupraPete | Thu, 10 April 2003 03:20 |
|
Re: Cams wanted for 7MGTE
|
SUPRA MAN | Thu, 10 April 2003 03:35 |
|
Re: Cams wanted for 7MGTE
|
Danners | Thu, 10 April 2003 03:37 |
|
Re: Cams wanted for 7MGTE
|
ed_ma61 | Thu, 10 April 2003 12:09 |
|
Re: Cams wanted for 7MGTE
|
Danners | Thu, 10 April 2003 22:28 |
|
Re: Cams wanted for 7MGTE
|
SupraPete | Thu, 10 April 2003 03:41 |
|
Re: Cams wanted for 7MGTE
|
SUPRA MAN | Thu, 10 April 2003 03:54 |
|
Re: Cams wanted for 7MGTE
|
SupraPete | Thu, 10 April 2003 09:11 |
|
Re: Cams wanted for 7MGTE
|
gianttomato | Thu, 10 April 2003 05:19 |
|
Re: Cams wanted for 7MGTE
|
SUPRA MAN | Thu, 10 April 2003 15:12 |
|
Re: Cams wanted for 7MGTE
|
gianttomato | Thu, 10 April 2003 15:24 |
|
Re: Cams wanted for 7MGTE
|
7M-Brisbane | Thu, 10 April 2003 09:13 |
|
Re: Cams wanted for 7MGTE
|
gianttomato | Thu, 10 April 2003 09:28 |
|
Re: Cams wanted for 7MGTE
|
rvrolla | Thu, 10 April 2003 09:49 |
|
Re: Cams wanted for 7MGTE
|
SUPRA MAN | Thu, 10 April 2003 10:18 |
|
Re: Cams wanted for 7MGTE
|
SUPRAGTE | Thu, 10 April 2003 11:41 |
|
Re: Cams wanted for 7MGTE
|
ed_ma61 | Thu, 10 April 2003 11:43 |
|
Re: Cams wanted for 7MGTE
|
ed_ma61 | Thu, 10 April 2003 15:27 |
|
Re: Cams wanted for 7MGTE
|
ed_ma61 | Thu, 10 April 2003 15:35 |
