F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 1UZ INTO MA61 Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
justcallmefrank Forums Junkie I supported Toymods Location: Perth Registered: May 2002	Re: 1UZ INTO MA61 Fri, 11 April 2003 10:32 I think Glen got most of it sorted. Carbontech - These are the people who make the Lambo replicas. Their website is: http://www.carbontech.com.au . They will make a bellhousing for the W58 although he said in one of his e-mails that he may be able to do an R154 one too. You still need a flywheel, I was thinking of getting one custom, and a clutch...it all adds up to over the $1000 mark before you include the gearbox. The ECU can be fooled into thinking the auto is still there, someone was going to tell me how to do it, but they never got around to it. If it doesn't receive the signal it goes into limp mode. Should you choose to run the auto, you shouldn't have any problems, there is even a way to make it shift gears manually, I just have to get Allan to tell me how to do it again! Engine mounts will have to be custom. I think you shouldn't have problems with clearance with the exhaust manifolds, although should that be a problem, the Soarer ones are the smallest I believe. All the Mk2 Supras have engines with a front sump, and the conclusion was that you would need to either find a front sump front cut (maybe Aristo?) or get the one that comes with the engine reshaped. I've got pictures of one example of this should you want to see them. There are many upgrades for the 1UZFE to complement its bullet-proof design. They range from forced induction such as supercharging or turbocharging, but my dream was to have one with a nice set of extractors, 8-throttle bodies, decent cams and programmable ECU... Basically for me it was a case of, by the time I would actually get the car up and running (I DEFINETLY wanted a manual) I would be out of uni and possibly have enough money to look at something a bit newer. Thus the conversion never got off the ground and swapping a 1GGTE into my GA61 seemed like the logical option. I suggest you go to the Soarer Diehard site and download the exhaust sounds....they are positively drool worthy. Seriously, if I wasn't at uni, I'd like to do this, I've got this whacked idea of one stage down the track fitting a 3UZFE into a NA Mk4 Supra SZ-R...sounds nice [Report message to a moderator]

	Subject	Poster	Date
	1UZ INTO MA61	leigh	Fri, 11 April 2003 07:01
	Re: 1UZ INTO MA61	BlackSupra	Fri, 11 April 2003 08:30
	Re: 1UZ INTO MA61	justcallmefrank	Fri, 11 April 2003 10:32
	Re: 1UZ INTO MA61	draven	Sat, 12 April 2003 02:41
	Re: 1UZ INTO MA61	justcallmefrank	Sat, 12 April 2003 09:16
	Re: 1UZ INTO MA61	thefastj	Sun, 13 April 2003 08:24
	Re: 1UZ INTO MA61	SupraPete	Sun, 13 April 2003 23:17
	Re: 1UZ INTO MA61	thefastj	Mon, 14 April 2003 00:57
	Re: 1UZ INTO MA61	SupraPete	Mon, 14 April 2003 01:04
	Re: 1UZ INTO MA61	BlackSupra	Mon, 14 April 2003 01:18
	Re: 1UZ INTO MA61	biased99	Mon, 14 April 2003 02:21
	Re: 1UZ INTO MA61	draven	Mon, 14 April 2003 02:22
	Re: 1UZ INTO MA61	leigh	Mon, 14 April 2003 03:00
	Re: 1UZ INTO MA61	SupraPete	Mon, 14 April 2003 03:28
	Re: 1UZ INTO MA61	Norbie	Mon, 14 April 2003 05:26
	Re: 1UZ INTO MA61	draven	Mon, 14 April 2003 08:51
	Re: 1UZ INTO MA61	Norbie	Mon, 14 April 2003 23:06
	Re: 1UZ INTO MA61	SupraPete	Mon, 14 April 2003 23:14
	Re: 1UZ INTO MA61	SupraPete	Mon, 14 April 2003 04:16
	Re: 1UZ INTO MA61	biased99	Mon, 14 April 2003 22:55
	Re: 1UZ INTO MA61	SupraPete	Mon, 14 April 2003 23:11
	Re: 1UZ INTO MA61	KDog	Mon, 14 April 2003 04:37
	Re: 1UZ INTO MA61	thefastj	Mon, 14 April 2003 05:22

Previous Topic:	Audio products/install.....
Next Topic:	Paint preparations- fibreglass

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.