| Author | Topic |
|---|
Location:
Melbourne
Registered:
January 2003
|
 HELP! which pod adaptor?!
|
Fri, 20 June 2003 05:21
|
 |
i've got a 1UZ and am in desperate need of an adaptor for the AFM so that i can fit a Pod filter to it.
As you can see the AFM is square....the screw holes are 2" x 4" apart (which is roughly 5cm x 10cm) and i can't seem to find an adaptor for it...they are all the wrong sizes.
is there any other cars that have the same measurements for their adaptor screw holes?
or does anybody know where i can get one?
was looking for something just like this:
as the engine is for a transplant...not in a Soarer.
|
|
|
Location:
Epping, Sydney
Registered:
April 2003
|
|
|
Location:
Melbourne
Registered:
January 2003
|
|
Re: HELP! which pod adaptor?!
|
Fri, 20 June 2003 05:43
|
|
yeah, sorta like that.
but i need one the right size, plus i'd prefer it'd be in Australia somewhere.
just save a lot of time being here already.
|
|
|
Location:
Barossa valley SA
Registered:
January 2003
|
|
Re: HELP! which pod adaptor?!
|
Fri, 20 June 2003 08:38
|
|
|
you can buy them from car shops everywhere. personally I couldn't be bothered spending $50-$60 on an adaptor so I made my own using stainless steel, only cost me $5.
|
|
|
Location:
Hornsby, N.S.W
Registered:
September 2002
|
|
Re: HELP! which pod adaptor?!
|
Fri, 20 June 2003 08:48
|
|
if you buy a uni-filter then you get the whole mounting kit and everything so you just bolt it straight onto the afm, takes about 2 minutes!!!
justin
|
|
|
Location:
Cabramatta, NSW
Registered:
May 2002
|
 Re: HELP! which pod adaptor?!
|
Sun, 22 June 2003 01:46
|
|
| RobST162 wrote on Fri, 20 June 2003 15:31 |
Something like this?
I don't know the sizes exactly, but I found in on Ebay in the US under air filters for cars
|
Urgh! Imagine what that'd do to the airflow?! Get something that's tapered!
|
|
|
I supported Toymods
Location:
Central Coast
Registered:
May 2002
|
|
Re: HELP! which pod adaptor?!
|
Mon, 23 June 2003 03:28
|
|
I got a Uni-Filter one, and as stated above, it comes with everything ready to bolt up. Including a mounting bracket ! Price was quite reasonable too.
|
|
|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Re: HELP! which pod adaptor?!
|
Mon, 23 June 2003 03:35
|
|
|
i got a HK$ (cast tapered) one from the US off ebay for AUD$60 landed for my 7m
|
|
|
Toymods Social Secretary
Location:
Sydney
Registered:
July 2002
|
|
Re: HELP! which pod adaptor?!
|
Mon, 23 June 2003 03:40
|
|
|
anyone got one for an 18R-GEU that will fit into my RA28 though?
|
|
|
