Location: logan river brisbane
Registered: July 2005
1G fan to water pump inclusive [SOLD]
Fri, 09 December 2005 02:10
Yep,recently aquired these parts but no good for the intended application so re-selling.
Water pump looks good with a stainless impeller in excellent condition,all the pulleys,the clutch fan and the plastic fan itself.One of the fan blades has a 12mm triangular "notch" in a blade but the rest looks A1.
$40 and its yours.
in other words its whatever normally hangs off the front of a 1G water pump [and the pump]
Location: logan river brisbane
Registered: July 2005
Re: 1G fan to water pump inclusive
Mon, 12 December 2005 15:11
Hi Guys and thanks for your interest.
It always has been first in best dressed so I will answer in order.
Turbor28.sure,can post anywhere.The pulley is a press fit onto the water pump I believe so I will send with the pulley on if thats Ok and Dust can have the fan if you dont want it.$50 incl post to Sydney.pls give me a PM with address if you want it.Cheers.Pete.
Dust.It is certainly yours if "first in" decides he doesnt want it.please PM me your post details if you like.[may save time later] cheers.Pete.ps.if turboR28 doesnt want the fan do you want it for the cost of post? it does have a small fault being a 10mm triangular notch on the back edge of a blade.will work OK but potentially a poofteenth out of balance at 10 million revs or so...........
All sounds good, definately want it
I can direct deposit the money in your account. Send me a PM with your bank details and i'll reply with my address.
Don't need the fan, but pulley is fine to stay on there.
Fri, 09 December 2005 02:10
