| Author | Topic |
|---|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: Soarer owners dedicated thread
|
Mon, 28 November 2005 23:33
 
|
 |
| Big Rob wrote on Mon, 28 November 2005 10:30 |
Now i am under the assumption that since the AFM has not maxed out it shall still be adding fuel along with the air. So what could be dodgy about that?
|
Point correct. It will fuel right up until it runs out of resolution, then it'll feel like you broke it, and you'll have a sore neck 
| Big Rob wrote on Mon, 28 November 2005 10:30 |
Hey ndqcpr, yes is the same one as off ebay. If you have it sitting just bellow 10 psi, you are pretty much running it at stock levels. Aproxximatly 9psi is stock. I think you can go all the way up past 16psi before hitting boost cut or so but the little CT12's wont be anywhere in their efficiency range. Pump it up a little and you will love it more.
|
My stock level was 7psi also. I'm lucky to get to 14psi before I hit boost cut.
|
|
|
Location:
Pine Rivers QLD
Registered:
April 2005
|
|
Re: Soarer owners dedicated thread
|
Mon, 28 November 2005 23:35
|
|
Pulsar_D00D
I would say search the thread but it would take a year lol, shoulda just bought a manual 
Hey matt i know a few people who are waiting on head gaskets, he imported it from the states or something and it has been a good couple of months. Those wheels look funny, it would have been cool to drive it around though, like a little monster truck. Those wheels would kill your hubs too wouldn't they?
|
|
|
Location:
Pine Rivers QLD
Registered:
April 2005
|
|
Re: Soarer owners dedicated thread
|
Mon, 28 November 2005 23:37
|
|
|
and JCMF (post when i did!!!) you blew your first ones at 12 though right, hence why i will keep mine where they are.
|
|
|
I supported Toymods
Location:
Adelaide
Registered:
July 2004
|
|
Re: Soarer owners dedicated thread
|
Mon, 28 November 2005 23:40
|
|
| ndgcpr wrote on Tue, 29 November 2005 10:05 |
Pulsar_D00D
I would say search the thread but it would take a year lol, shoulda just bought a manual
Hey matt i know a few people who are waiting on head gaskets, he imported it from the states or something and it has been a good couple of months. Those wheels look funny, it would have been cool to drive it around though, like a little monster truck. Those wheels would kill your hubs too wouldn't they?
|
yer they arent too kind on the hubs, but I only did a total of about 50km's on them with no harsh cornering, so I doubt they did any damage...plus we checked too see if they were greased up good before we put the wheels on...luckily enough they were 
|
|
|
Location:
Central Coast, NSW
Registered:
February 2005
|
|
Re: Soarer owners dedicated thread
|
Mon, 28 November 2005 23:46
|
|
| TT_50AR wrote on Tue, 29 November 2005 10:32 |
OH MERUDO!! pulsar dood has ur old car!! hehe
|
he does?
wicked 
i've got the manual crossmember, bellhousing and slave cylinder for a manual conversion still if you want to buy the stuff off me. When I had the car I had been collecting stuff and was going to do a manual conversion
but then conveniently (not convenient for my wallet) decided I wanted to save and do a full 1J conv. instead!
but then I had to sell the car. 
if you want the stuff off me, you can get it off me
cheers
|
|
|
Location:
sydney, turramurra
Registered:
April 2005
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 00:26
|
|
|
hey does any1 have fuel lines or 7m engine mount bolts?
|
|
|
Location:
sydney, turramurra
Registered:
April 2005
|
|
|
Location:
Perth Western Australia
Registered:
April 2004
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 02:48
|
|
the MZ21 that WaxE (ian) sold recently had that digital aircon controls aswell
so im guess in those pics its a 1986 (because of the rear lights) Mz21 ? or did they not have MZ21's then .....
gah i dunno but that WALD kit looks swwwwwwwwwwweeettt
|
|
|
Location:
sydney, turramurra
Registered:
April 2005
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 02:50
|
|
| coFF33 wrote on Tue, 29 November 2005 13:48 |
the MZ21 that WaxE (ian) sold recently had that digital aircon controls aswell
so im guess in those pics its a 1986 (because of the rear lights) Mz21 ? or did they not have MZ21's then .....
gah i dunno but that WALD kit looks swwwwwwwwwwweeettt
|
yeh the kit looks good hey but they stopped production of em:(
|
|
|
Location:
Perth Western Australia
Registered:
April 2004
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 02:59
|
|
| TT_50AR wrote on Tue, 29 November 2005 10:50 |
| coFF33 wrote on Tue, 29 November 2005 13:48 |
the MZ21 that WaxE (ian) sold recently had that digital aircon controls aswell
so im guess in those pics its a 1986 (because of the rear lights) Mz21 ? or did they not have MZ21's then .....
gah i dunno but that WALD kit looks swwwwwwwwwwweeettt
|
yeh the kit looks good hey but they stopped production of em:(
|
THOSE MONSTERS !!!!!!!!!!!!!!!1 
|
|
|
Location:
Sydney, Northen Beaches
Registered:
July 2004
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 03:34
|
|
|
Where do you get those sweet-ass looking Side Skirts and Front Bar from? I've seen them before, mines just got some boggo standard shiat. Looks heaps shithouse.
|
|
|
Location:
Perth Western Australia
Registered:
April 2004
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 03:35
|
|
post some pics of ya ride Pulsar D00D ...
even better , goto the members rides section and make a "Pulsar D00D's Z20 Soarer" thread with pics and info on it
|
|
|
Location:
Sydney, Northen Beaches
Registered:
July 2004
|
|
|
Location:
Perth Western Australia
Registered:
April 2004
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 03:55
|
|
haha , everyone wants to wear skirts !
well this thread has been going for about 2 years , and still no one has successfully been able to get hold of some and get some copys made ....
There is a group buy of the Diana kit happening soon .. as far as i know ...
if not the Diana , it will be the other one Bazil has so hopefully u can score on that
|
|
|
Location:
Campbelltown
Registered:
November 2003
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 04:07
|
|
| coFF33 wrote on Tue, 29 November 2005 14:55 |
haha , everyone wants to wear skirts !
well this thread has been going for about 2 years , and still no one has successfully been able to get hold of some and get some copys made ....
There is a group buy of the Diana kit happening soon .. as far as i know ...
if not the Diana , it will be the other one Bazil has so hopefully u can score on that
|
try since april this year
|
|
|
Location:
south east - melbourne
Registered:
March 2004
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 04:25
|
|
someone photoshop this front bar for me please
and some tint on the glass as well cheers
|
|
|
Location:
sydney, turramurra
Registered:
April 2005
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 04:48
|
|
| indian wrote on Tue, 29 November 2005 15:25 |
someone photoshop this front bar for me please
and some tint on the glass as well cheers
|
photoshop front bar 2 wat
|
|
|
Location:
south east - melbourne
Registered:
March 2004
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 04:54
|
|
IM TRYIGN TO MODIFY THE STOCK FRONT BAR SO IT LOOKS BETTER
any ideas also want the cooler to be visible its pretty stealth atm hiding behind that front bar
i wont be using any mesh ora nything like wise just cutting some bits off it
any ideas ??????
|
|
|
I supported Toymods
Location:
Adelaide
Registered:
July 2004
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 04:56
|
|
| indian wrote on Tue, 29 November 2005 15:24 |
IM TRYIGN TO MODIFY THE STOCK FRONT BAR SO IT LOOKS BETTER
any ideas also want the cooler to be visible its pretty stealth atm hiding behind that front bar
i wont be using any mesh ora nything like wise just cutting some bits off it
any ideas ??????
|
id be putting some metal piping on the cooler before you modify the stocker bar...id be pretty embarrased to have the PVC showing...but thats just me i guess
|
|
|
Location:
south east - melbourne
Registered:
March 2004
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 05:01
|
|
hey very true man thats one thing i need to change first when i have the money
but for all those who are wondering
its still holdign fine daily driven 9 psi
and guess what not even one person so far whose looked in the engine bay has picked it out to be pvc piping
hows that for dodgy work lollllll
|
|
|
Location:
sydney, turramurra
Registered:
April 2005
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 05:17
|
|
do u have a betta pic of ur car indian
a bigger 1 we can work on
|
|
|
Location:
south east - melbourne
Registered:
March 2004
|
|
|
Location:
sydney, turramurra
Registered:
April 2005
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 05:35
|
|
yeh but wen i open it in photoshop n zoom in it goes all pixelated
so its a bit annoyin 2 work on
but tomoz ill give it ago n c wat i can do
|
|
|
Location:
perth
Registered:
June 2005
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 10:54
|
|
 \\what more can u do
|
|
|
Location:
Bunbury, W.A.
Registered:
January 2005
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 13:08
|
|
|
Hmmm, never really thought of doin it that way...
|
|
|
Location:
Perth Western Australia
Registered:
April 2004
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 13:39
|
|
| stealth007008 wrote on Tue, 29 November 2005 18:54 |
\\what more can u do
|
HAWWWTTTTTTTTTTTTTTtttttttttttttttttt!!!!!!11111
|
|
|
Location:
Bunbury, W.A.
Registered:
January 2005
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 13:49
|
|
Maybe something like this? It's only ms paint but you could have done that youself to see what it could look like...
|
|
|
I supported Toymods
Location:
Adelaide
Registered:
July 2004
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 21:58
|
|
| coFF33 wrote on Wed, 30 November 2005 00:09 |
| stealth007008 wrote on Tue, 29 November 2005 18:54 |
\\what more can u do
|
HAWWWTTTTTTTTTTTTTTtttttttttttttttttt!!!!!!11111
|
I am definitely doing that on my new front bar
|
|
|
Location:
sydney
Registered:
May 2005
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 22:42
|
|
| stealth007008 wrote on Tue, 29 November 2005 21:54 |
\\what more can u do
|
Is that an extra lip on the bottom the bar as well?
|
|
|
Location:
sydney, turramurra
Registered:
April 2005
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 22:49
|
|
| soarted bruva wrote on Wed, 30 November 2005 09:42 |
Is that an extra lip on the bottom the bar as well?
|
yep
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 23:24
|
|
| ndgcpr wrote on Tue, 29 November 2005 07:37 |
and JCMF (post when i did!!!) you blew your first ones at 12 though right, hence why i will keep mine where they are.
|
I haven't blown any turbos  They're still going, they've hit 18psi when my ECU decided a boost cut was optional, I'd have them set higher than the 13-14psi they're currently at in a heartbeat if only I could keep it from boost cutting.
|
|
|
Location:
sunny coast, qld
Registered:
October 2002
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 23:26
|
|
soarted bruva: Is that your car in the avatar? It looks the same as Rossco’s and AFAIK he had a TD07 as well?
Your car is the first car I have heard of with a built 1jz. Some people have cams and head work but I have never heard of anyone upgrading the rods, pistons etc. as most will go to a 2jz block at that stage. I am very interested to see how much power your car makes. I know you may have mentioned it but could you make a full list of mods? Thanks
Chris
|
|
|
Location:
sydney, turramurra
Registered:
April 2005
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 23:33
|
|
| justcallmefrank wrote on Wed, 30 November 2005 10:24 |
| ndgcpr wrote on Tue, 29 November 2005 07:37 |
and JCMF (post when i did!!!) you blew your first ones at 12 though right, hence why i will keep mine where they are.
|
I haven't blown any turbos They're still going, they've hit 18psi when my ECU decided a boost cut was optional, I'd have them set higher than the 13-14psi they're currently at in a heartbeat if only I could keep it from boost cutting.
|
does it always boost cut.. or have u actually tried it wit the car fully warm and doin it..cause mine only cuts when its really cold
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 23:41
|
|
| TT_50AR wrote on Wed, 30 November 2005 07:33 |
does it always boost cut.. or have u actually tried it wit the car fully warm and doin it..cause mine only cuts when its really cold
|
With the setting I have it on now, it doesn't often boost cut. Just occasionally when I nail it in 2nd, it usually happens below 1 bar, so I think it's the stupid flap-type AFM playing funny buggers.
Oh, and I ONLY nail it when it's fully warm
|
|
|
Location:
sydney, turramurra
Registered:
April 2005
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 23:48
|
|
| justcallmefrank wrote on Wed, 30 November 2005 10:41 |
| TT_50AR wrote on Wed, 30 November 2005 07:33 |
does it always boost cut.. or have u actually tried it wit the car fully warm and doin it..cause mine only cuts when its really cold
|
With the setting I have it on now, it doesn't often boost cut. Just occasionally when I nail it in 2nd, it usually happens below 1 bar, so I think it's the stupid flap-type AFM playing funny buggers.
Oh, and I ONLY nail it when it's fully warm
|
yeh cause in mine ive got it on 20 psi and have gone 2 23 but that was 2 much 4 the cut
20 in my 1g sits quite nice n doesn fuel cut
maybe tey sum octane booster n c if that actually helps a tiny bit..not sure if it will
is urs auto 1g or wat
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: Soarer owners dedicated thread
|
Tue, 29 November 2005 23:59
|
|
20psi and no boost cut, WTF!? It would appear someone has played with the spring in your AFM, there is no way it should be able to let that amount of boost.
My 1G is manual, but that shouldn't matter. Octane booster isn't going to assist at all, the boost cut is simply a matter of the amount of airflow coming into the engine. When it gets to a pre-determined point, it cuts.
|
|
|
Location:
sydney, turramurra
Registered:
April 2005
|
|
Re: Soarer owners dedicated thread
|
Wed, 30 November 2005 00:06
|
|
| justcallmefrank wrote on Wed, 30 November 2005 10:59 |
20psi and no boost cut, WTF!? It would appear someone has played with the spring in your AFM, there is no way it should be able to let that amount of boost.
My 1G is manual, but that shouldn't matter. Octane booster isn't going to assist at all, the boost cut is simply a matter of the amount of airflow coming into the engine. When it gets to a pre-determined point, it cuts.
|
try taking ur airfilter off so its just pure air flowin..i dont kno..i kno that if u put a high psi on like these small turbos then its a sudden boost and then the turbo wears a bit and then slowly doesnt give u as much boost later and later on..if u get wat i mean
like over time .i dont kno..
plus my boost controller is sum cheapy 30bux 1
|
|
|
Banned user
Location:
sydney
Registered:
November 2005
|
|
|
I supported Toymods
Location:
Adelaide
Registered:
July 2004
|
|
Re: Soarer owners dedicated thread
|
Wed, 30 November 2005 00:39
|
|
errr i think ill speak for everyone when I say....wtf? 
|
|
|
Location:
Campbelltown
Registered:
November 2003
|
|
Re: Soarer owners dedicated thread
|
Wed, 30 November 2005 00:41
|
|
|
fuck not again, this is the third time he's posted it two separate threads now this one. One has been deleted thus far. Man some ppl have too much time on their hands.
|
|
|
Location:
sunny coast, qld
Registered:
October 2002
|
|
Re: Soarer owners dedicated thread
|
Wed, 30 November 2005 01:00
|
|
That was quick! I was going to come here and post "banned" but he was already gooooooooooooooooooooooone. 
|
|
|
Location:
Central Coast, NSW
Registered:
February 2005
|
|
Re: Soarer owners dedicated thread
|
Wed, 30 November 2005 02:00
|
|
| stealth007008 wrote on Tue, 29 November 2005 21:54 |
\\what more can u do
|
PHAT.
|
|
|
Location:
sydney, turramurra
Registered:
April 2005
|
|
Re: Soarer owners dedicated thread
|
Wed, 30 November 2005 04:21
|
|
| justcallmefrank wrote on Wed, 30 November 2005 10:59 |
20psi and no boost cut, WTF!? It would appear someone has played with the spring in your AFM, there is no way it should be able to let that amount of boost.
My 1G is manual, but that shouldn't matter. Octane booster isn't going to assist at all, the boost cut is simply a matter of the amount of airflow coming into the engine. When it gets to a pre-determined point, it cuts.
|
hey mate maybe run it down the 1/4 n c wat it runs if it doesnt fuel cut 2 much
i ran a 14.7 but i kno i could have gotten a bit faster but yeh thats a stock 1g auto
before when it was on stock boost i ran a 16.2 best which sux 4 a tt but yeh wacked 1.5 secs off my time wit just boost
|
|
|
Registered:
March 2005
|
|
Re: Soarer owners dedicated thread
|
Wed, 30 November 2005 04:39
|
|
MMMMMMMMMMMMMMMM  MMMMMMMMMMMMMMMM
I so want one of those lips now! Add that to the list of unobtainable items: side skirts, rear pods, lip.
Ahh now i am also thinking of getting my car painted two tone. That looks sooooooo cool. I doubt though that it would be road legal, looks like the front bumper support would have to be cut through or something. But then again, it doesnt look like its for road use as it has a full cage and bonnet pins. Except for the fact it has a licence plate. Ahh thats an awosme soarer.
|
|
|
I supported Toymods
Location:
Adelaide
Registered:
July 2004
|
|
Re: Soarer owners dedicated thread
|
Wed, 30 November 2005 04:45
|
|
|
in japan that car would be perfectly acceptable for road use
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: Soarer owners dedicated thread
|
Wed, 30 November 2005 05:29
|
|
| TT_50AR wrote on Wed, 30 November 2005 12:21 |
hey mate maybe run it down the 1/4 n c wat it runs if it doesnt fuel cut 2 much
i ran a 14.7 but i kno i could have gotten a bit faster but yeh thats a stock 1g auto
before when it was on stock boost i ran a 16.2 best which sux 4 a tt but yeh wacked 1.5 secs off my time wit just boost
|
It's run on the quarter with two 15.3's because I can't launch. It had enough mph for an easy low 14, and thats still with no power above 5000rpm.
|
|
|
Location:
sydney, turramurra
Registered:
April 2005
|
|
Re: Soarer owners dedicated thread
|
Wed, 30 November 2005 05:34
|
|
| justcallmefrank wrote on Wed, 30 November 2005 16:29 |
| TT_50AR wrote on Wed, 30 November 2005 12:21 |
hey mate maybe run it down the 1/4 n c wat it runs if it doesnt fuel cut 2 much
i ran a 14.7 but i kno i could have gotten a bit faster but yeh thats a stock 1g auto
before when it was on stock boost i ran a 16.2 best which sux 4 a tt but yeh wacked 1.5 secs off my time wit just boost
|
It's run on the quarter with two 15.3's because I can't launch. It had enough mph for an easy low 14, and thats still with no power above 5000rpm.
|
i ran 14.7 at 100mph my bro has a jzz30 1j and he ran 14.1 at 99mph
lol so i was faster than him down the hole str8 lol but therefore he got d better start
|
|
|
Location:
sydney
Registered:
May 2005
|
|
Re: Soarer owners dedicated thread
|
Wed, 30 November 2005 05:46
|
|
| Chris Davey wrote on Wed, 30 November 2005 10:26 |
soarted bruva: Is that your car in the avatar? It looks the same as Rossco’s and AFAIK he had a TD07 as well?
Your car is the first car I have heard of with a built 1jz. Some people have cams and head work but I have never heard of anyone upgrading the rods, pistons etc. as most will go to a 2jz block at that stage. I am very interested to see how much power your car makes. I know you may have mentioned it but could you make a full list of mods? Thanks
Chris
|
Yeah Chris, thats my soarer in the avatar. Think Rossco's is black and silver two tone where i've got gold down the bottom half. TD07 has now been replaced as of hours ago with a GT35/40 BB turbo (TD07 now for sale, anyone?) I'll have some figues 2morrow once we tune and do a dyno run. The car was previously used for drags in japan and was meant to have been putting out 700hp as well as having a fair bit done to the motor. Mods that i'm aware of are
TD07 turbo (now replaced)
Custom manifold
HKS external wastegate
was running hks F con V pro plug in (replaced with microtech,
Huge FMIC
Large injectors,
aftermarket fuel rail
cam and adjustble cam gears,
forgies,
strengthed valve springs,
GTR fuel pump,
3.5 cat with high flow cat
Adjustable coilovers all round
Think thats it. We got 270rwkw @16psi last week but 2morrow's dyno sheet should be a lot more impressive if we finally have no hurdles in turning up the boost this time
|
|
|
Location:
sydney, turramurra
Registered:
April 2005
|
|
Re: Soarer owners dedicated thread
|
Wed, 30 November 2005 06:08
|
|
vent!!
|
|
|
Registered:
March 2005
|
|
Re: Soarer owners dedicated thread
|
Wed, 30 November 2005 06:55
|
|
Hey guys, well my car was runnign awsome till i filled up today. Last time i filled up a week ago it was with optimax and brought the car back to being responsive and felt much more alive. I was so pleased but then today i put regular unleadd in it and it is now sad and mopy. Can knock sensor die and go crazy, pulling tonnes of timing as the car never used to be like this?
Any ideas
|
|
|
Location:
Perth
Registered:
June 2002
|
|
|
I supported Toymods
Location:
Adelaide
Registered:
July 2004
|
|
Re: Soarer owners dedicated thread
|
Wed, 30 November 2005 06:57
|
|
| TT_50AR wrote on Wed, 30 November 2005 16:38 |
vent!!
|
Topstage!
|
|
|
I supported Toymods
Location:
Adelaide
Registered:
July 2004
|
|
Re: Soarer owners dedicated thread
|
Wed, 30 November 2005 06:59
|
|
fuckyeah...now time for some skids pics/vids isnt it
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: Soarer owners dedicated thread
|
Wed, 30 November 2005 07:01
|
|
| Big Rob wrote on Wed, 30 November 2005 14:55 |
Any ideas
|
Yeah, don't ever put regular unleaded in it. At a bare minimum feed it a diet of premium, preferrably 98RON. I can imagine it would be pulling shitloads of timing out of it to suit the crappy fuel!
|
|
|
Location:
Perth Western Australia
Registered:
April 2004
|
|
Re: Soarer owners dedicated thread
|
Wed, 30 November 2005 08:09
|
|
i feed it nothing but Premium (Silver one)or Ultimate
if i have NO money , and im talking , not enuf for food ill feed it shell premium ...
even my old RA65 22re wasnt happy on unleaded AND THATS AN 84' !!!!
|
|
|
Registered:
August 2002
|
|
Re: Soarer owners dedicated thread
|
Wed, 30 November 2005 10:28
|
|
Rosco has some very nice skid pics. 
|
|
|
Location:
perth
Registered:
June 2005
|
|
Re: Soarer owners dedicated thread
|
Wed, 30 November 2005 11:22
|
|
|
yes but they should look a hell of a lot better now
|
|
|
Location:
Pine Rivers QLD
Registered:
April 2005
|
|
Re: Soarer owners dedicated thread
|
Thu, 01 December 2005 05:27
|
|
I always fill mine with ultimate now, i used to use optimax once but i don't anymore, i like ultimate better.
And there is no stories of anyone blowing there turbo's below 14PSI? hmm, i think i am gonna be "fully sik" and bump it up to 8.5PSI/12PSI.
Now TT_50AR are you reading 20PSI at the gauge, because as i have posted in the tech section it seems that my gauge is out, That boost reading i have posted is Dyno guys/my boost gauge. so its running 12PSI on my boost gauge but the dyno guys reckon the dyno read 8.5. i reckon its going harder and that my PSSHH (even if its back pressure through the AFM sound so much better now .
|
|
|
Location:
sydney, turramurra
Registered:
April 2005
|
|
Re: Soarer owners dedicated thread
|
Thu, 01 December 2005 05:48
|
|
| ndgcpr wrote on Thu, 01 December 2005 16:27 |
I always fill mine with ultimate now, i used to use optimax once but i don't anymore, i like ultimate better.
And there is no stories of anyone blowing there turbo's below 14PSI? hmm, i think i am gonna be "fully sik" and bump it up to 8.5PSI/12PSI.
Now TT_50AR are you reading 20PSI at the gauge, because as i have posted in the tech section it seems that my gauge is out, That boost reading i have posted is Dyno guys/my boost gauge. so its running 12PSI on my boost gauge but the dyno guys reckon the dyno read 8.5. i reckon its going harder and that my PSSHH (even if its back pressure through the AFM sound so much better now .
|
well that could b tru mate but if i turn the controller right down it reads 9psi which is wat stock psi it normally runs
but on20 its a hell of a bigger jolt at 1st when its on full boost
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: Soarer owners dedicated thread
|
Thu, 01 December 2005 06:47
|
|
| ndgcpr wrote on Thu, 01 December 2005 13:27 |
And there is no stories of anyone blowing there turbo's below 14PSI?
|
Not on 1G's, they have steel wheels.
|
|
|
