| Author | Topic |
|---|
Location:
Melbourne: South east
Registered:
May 2004
|
|
Re: Drift meet at calder, wednesday 17/08/05
|
Fri, 19 August 2005 02:41
 
|
 |
I just got my new "D1 SPEC" steering wheel spacer/snap off lock kit from Justjap.com
Well worth it for $69. 
Adds approx 7cm more clearance. So less chance of hitting that indicator (out the window). 
And taking off the wheel in 2seconds is fun for sum reason. 
|
|
|
I supported Toymods
Location:
melbourne
Registered:
June 2002
|
|
Re: Drift meet at calder, wednesday 17/08/05
|
Fri, 19 August 2005 03:25
|
|
looks cool, how sloppy does it fit?
seem sturdily made? do the screws go into aluminium? wonder if it would fit my cheapo autotechnica steering wheel.
|
|
|
Location:
Melb
Registered:
May 2002
|
|
Re: Drift meet at calder, wednesday 17/08/05
|
Fri, 19 August 2005 03:42
|
|
That trueno coupe looked cool. I wanted to see how everyone was going cos there were so many sprinters. Was in the beginners section for a little while and didn't really get to watch the other sprinters do their rounds as they probably weren't there yet or were doing it when I was on my way back from my lap.
Then I decided to go to the other side where Henn was ripping it up good! Sorry for the spin in that last run before the comps started Henn.
I'm glad my car made it back in one piece, just badluck for my rear tyres as they are no good hehe. And hmm, my 2 month old? C-drives on the front overheated! just slight edges of the tread area were melted. Has anyone used a539's on the track? How'd they go? I mean my C-drives were on the front, I wasn't that harsh to them!
I was in the two toned silver/blue sprinter by the way.
|
|
|
Location:
Melbourne: South east
Registered:
May 2004
|
|
Re: Drift meet at calder, wednesday 17/08/05
|
Fri, 19 August 2005 03:57
|
|
| shinybluesteel wrote on Fri, 19 August 2005 13:25 |
looks cool, how sloppy does it fit?
seem sturdily made? do the screws go into aluminium? wonder if it would fit my cheapo autotechnica steering wheel.
|
Sloppy?.... It fits perfectly.
Yeh its sturdy and ur supplied with screws to bolt the steerin wheel to the spacer. And u use ur old bolts that came with your boss kit to bolt the spacer to the boss kit.
It fits 2 different bolt patterens. so it should fit the autotechnice wheel.
|
|
|
Location:
Rosanna, Melb
Registered:
June 2002
|
|
Re: Drift meet at calder, wednesday 17/08/05
|
Fri, 19 August 2005 05:02
|
|
| LiL_MiC wrote on Fri, 19 August 2005 13:42 |
Sorry for the spin in that last run before the comps started Henn.
|
I didn't notice at all so don't worry... I mean... you bastard that must have been why I spun out in that battle... 
| LiL_MiC wrote on Fri, 19 August 2005 13:42 |
Has anyone used a539's on the track? How'd they go?
|
I ran A539s up til recently and I think they were pretty good. Better than the Eagle F1s I now have on in my opinion. I find the outside edges always get flogged out quickly whatever I use though, probably due to understeer due to bad alignment/setup/skills.
Hen
|
|
|
Location:
Melbourne
Registered:
November 2003
|
|
Re: Drift meet at calder, wednesday 17/08/05
|
Fri, 19 August 2005 05:33
|
|
| ShiRi wrote on Thu, 18 August 2005 22:48 |
| toyoda wrote on Thu, 18 August 2005 12:53 |
shiri how is your car coming ? will u be out there?
|
not looking too good luke... i keep saying i'll be there, but things DON'T work out how they should... it's such a bitch that my car is so close to being finished but i just can't fucking finish it
piece of shit car... i should just throw it away
does anyone have adams number? (improvedae86) if so can they pm me? i really need to contact him
|
haha tell me about it, ive said id be out b4 but crap comes up... always fines  and not even good fines... fines like parking haha
|
|
|
Location:
Melbourne Victoria
Registered:
December 2003
|
|
|
Location:
Melb
Registered:
May 2002
|
|
|
Location:
Melbourne
Registered:
January 2003
|
|
Re: Drift meet at calder, wednesday 17/08/05
|
Sat, 20 August 2005 06:48
|
|
|
nothing to do with drifto , but after years of using the a539 i have since moved to the c drive on both the bmw's . At the start i thought that the c drive was much louder , and the dry grip level was much better , and the wet much worst . But after a few thousand ks the c drive really got alot better , wet grip levels where way better than the s539 which was a really surprise , and the noise seem to go too . Dry grip level is still very good for a tyre with so much tread depth Wouldnt go back to a539's now .
|
|
|
Location:
Melbourne
Registered:
March 2003
|
|
Re: Drift meet at calder, wednesday 17/08/05
|
Sat, 20 August 2005 16:55
|
|
couldnt make it to this one coz i had an assignment due... which i ended up not doing 
anyway if i get my shit together i might be able to get out there for the next one but i wont be sporting the toyota flag
If u see a guy out there in a s1 rx7 with a huge grin on his face come say hi
|
|
|
Location:
Melbourne
Registered:
October 2004
|
|
|
Location:
Victoria
Registered:
May 2002
|
|
Re: Drift meet at calder, wednesday 17/08/05
|
Wed, 31 August 2005 02:44
|
|
does anyone know when the date of the next one is?
There are 2 different dates on the full lock forums and the full lock website?
|
|
|
