| Author | Topic |
|---|
Location:
Canberra
Registered:
October 2002
|
|
Re: osix celica project 001 UPDATED 27.10.2005 UPDATED PHOTO
|
Thu, 27 October 2005 06:43
 
|
 |
MORE PICS!!!! 
Looks great so far mate,.. Keep it up
Cheers
|
|
|
Location:
Auckland NZ
Registered:
December 2003
|
|
Re: osix celica project 001 UPDATED 27.10.2005 UPDATED PHOTO
|
Thu, 27 October 2005 09:38
|
|
looking good osix, very promising. RA23 and TA23 stuff is different (from TA22) from the dashboard to the front of the car pretty much, everything back from there is the same though. the grill and the front bumper won't fit but you might be able to shorten the front bumper to suit.
i was expecting something like this. labour is a hell of a lot cheaper in Malaysia, plus they're willing to try a lot of stuff over there just because they haven't got things readily available. Saw some very cool cars when i was over there for work earlier this year (tubbed SR20DET MK2 escort and stuff like that), seen a lot of engine conversions and things that you wouldn't expect come from those directions.
cheers
Matt
|
|
|
Location:
Singapore
Registered:
October 2005
|
|
Re: osix celica project 001 UPDATED 27.10.2005 UPDATED PHOTO
|
Thu, 27 October 2005 16:50
|
|
Hm... Will the GRill Fit the Ta22 ?
i got a Ta23 grill i think not sure
- i also have both the side fender of the car covering above the wheel
- lot of modification must be done - in order to make the car nice
and safe
i am trying very hard with very limited resource here .
all the supoort and advice is Most welcome .
lots of thanks ..
i will be installing my engine back on my Car in about 2 week time
anyone with 1G-FE wiring diagram ..
and also what timing belt it use ?
i am considering using SUPRA tail light for my Ta22 if the Tail i got can't be fit ..
will be updating the photo as soon as i find time .
OSIX
|
|
|
Location:
SYDNEY
Registered:
August 2003
|
|
|
Location:
Singapore
Registered:
October 2005
|
|
Re: osix celica project 001 UPDATED 27.10.2005 UPDATED PHOTO
|
Fri, 28 October 2005 12:36
|
|
thanks you 
I will very much need all the advice i can get in order to get it done .
If anyone have the wiring diagram . and know how on changing the speedometer as well as parts i woould love to know more
Engine -1G-Fe ) need wiring Diagram
Speedmeter - damage - considering - Skyline speedometer or gen6 celica speedometer cluster .
osix
|
|
|
Location:
Sydney
Registered:
April 2004
|
|
Re: osix celica project 001 UPDATED 27.10.2005 UPDATED PHOTO
|
Fri, 28 October 2005 16:14
|
|
Hey mate not all the pics have worked for me but from what I see you are truly dedicated to making this Celica whole again and that deserves alot of credit.
If you need parts just let me know,chances are I have them lying around and ready to throw out so you can have them if you want to cover shipping.
I have the following that you can have for free!
rear good condition black back seat
front guards with a little rust,
bonet-little rust
front lights
blinkers
light surrounds
hinges
door trims
chrome trim
rubbers
windows
winders
window mechanisms
handles
front valance
Let me know mate!
I reckon we should show osix a bit of Aussie/toymods spirit and have a look at what we have lying around the place,gather it all together and help a fellow enthusiast get his dream up and running!
kahnn
|
|
|
Location:
Singapore
Registered:
October 2005
|
|
Re: osix celica project 001 UPDATED 27.10.2005 UPDATED PHOTO
|
Fri, 28 October 2005 18:07
|
|
Wow . i am so touch by your offer ..
I am trying my Best to get hat i can first before i ask for any help ..
I will keep your offer in view - as some of the parts you just listed is what i am looking for .
Eg. trim . Front light ( parking indictator )
i found the window for both Door but i am having some trouble with
Quarter window runnber and trim .
- People had been really Helpful . all around . and i thanks a million for the kindness .. will try my best first and will made a list of what i really can't find and custom made ."
Riceburna73 i Thanks you once again for your offer
add me to your MSN and if you ever come to Chiangmai let me know i bring you around
Osix
msn - linkz@hotmail.com
|
|
|
Location:
Singapore
Registered:
October 2005
|
|
|
I supported Toymods
Location:
I renounced punctuation
Registered:
May 2002
|
|
Re: osix celica project 001 UPDATED 30.10.2005 UPDATED PHOTO
|
Sun, 30 October 2005 10:24
|
|
Engine as I stated a little while ago is a 1GFE.
Gearbox looks like a T50.
Fantastic progress by the way. 
|
|
|
Location:
Singapore
Registered:
October 2005
|
|
Re: osix celica project 001 UPDATED 30.10.2005 progress update pg1
|
Sun, 30 October 2005 16:39
|
|
Is there any more related info Beside
The engine -stuff like WIRING DIAGRAM . Upgade option .
Stuff to take note ..
i was advice to change timing belt as well as clutch ,- what should i change too.
all this is so new .. please advice
osix
|
|
|
I supported Toymods
Location:
I renounced punctuation
Registered:
May 2002
|
|
Re: osix celica project 001 UPDATED 30.10.2005 progress update pg1
|
Sun, 30 October 2005 18:24
|
|
Now is a good time to replace the timing belt, and front and rear oil seals.
Easy to do the clutch whilst it is out.
|
|
|
Location:
Singapore
Registered:
October 2005
|
|
Re: osix celica project 001 UPDATED 30.10.2005 progress update pg1
|
Sun, 30 October 2005 21:02
|
|
Any idea what kinda timing belt i am using . is there a parts code
- the gear box seem to be leaking . and can see the oily parts .
should i worry that it might lead to more serious problem ?
or just some simple check and replacment
osix
|
|
|
Location:
Forster NSW
Registered:
September 2004
|
|
Re: osix celica project 001 UPDATED 30.10.2005 progress update pg1
|
Mon, 31 October 2005 09:27
|
|
Firstly, well done so far. Very impressive stuff!
Is the gearbox leaking, or is it just old oil coming out around the tailshaft spline? There shouldn't be any oil in it now it's out of the car!
You could replace the rear seal on it, although I don't know if the t50 will hold up behind the 1G-FE for too long. They aren't a very strong gearbox.
I'm not sure if anyone answered you about the door handles, but as far as I remember they're the same item for left or right doors. TA23 doors parts will also be interchangeable with your ta22.
|
|
|
Location:
Singapore
Registered:
October 2005
|
|
|
Location:
Sydney
Registered:
April 2004
|
|
Re: osix celica project 001 UPDATED 30.10.2005 progress update pg1
|
Mon, 31 October 2005 10:19
|
|
Hey mate,
The handles are different there is a right and a left side,
48 max is sending me some window winders for 6 bucks from Malaysia which i think will be roughly the same weight,so if you want a set of handles just let me know your shipping address and ill post them over.
cheers
nathan
|
|
|
Location:
Singapore
Registered:
October 2005
|
|
Re: osix celica project 001 UPDATED 30.10.2005 progress update pg1
|
Mon, 31 October 2005 11:48
|
|
I am going to malaysia maybe KL . on 6th or 7th ..
can i contact him and self collect ?
i am hunting for thevebt for you also .
i can't part siwth mine cos there ar ethe only pair i got .
if i come across any i will let you know too
i found some Ra23 side vent - old stuff but the guy selling kinda high - 80 % condition asking for $75 usd
is the vent just beside the Quarter window .
not sure if it still there . he keep tell me many peoole asking him about it .
Osix let me know if you are keen
|
|
|
Location:
Sydney
Registered:
April 2004
|
|
Re: osix celica project 001 UPDATED 30.10.2005 progress update pg1
|
Mon, 31 October 2005 12:37
|
|
Thats cool man dont worry about the swap i proposed on PM,at that time I didnt think you would get the car as far as you have.
As for the door handles i was using 48max as an example of how little the cost is to send to the lower half of asia.
I am happy to send them to him for you to pick up(if thats alright with you 48)? or I can send them to you in Singapore?
As i said I dont think it will be much in shipping but there is no rush either as im not going to sell them they are just here if you need them now or down the track
|
|
|
Location:
Singapore
Registered:
October 2005
|
|
Re: osix celica project 001 UPDATED 30.10.2005 progress update pg1
|
Mon, 31 October 2005 15:24
|
|
Thanks you so much for your help so far -
would be great to really meet up with some of you'll if i ever get a chance to go over your country
 
osix
|
|
|
Location:
Potts Point, Sydney
Registered:
October 2003
|
|
|
Location:
Potts Point, Sydney
Registered:
October 2003
|
|
Re: osix celica project 001 UPDATED 30.10.2005 progress update pg1
|
Tue, 01 November 2005 00:34
|
|
That's awesome progress! I bet everyone is eating their words now P
Keep up the great work, can't wait to see this car finished
|
|
|
Location:
Forster NSW
Registered:
September 2004
|
|
Re: osix celica project 001 UPDATED 30.10.2005 progress update pg1
|
Tue, 01 November 2005 01:53
|
|
My mistake about the door handles 
|
|
|
Location:
Sydney
Registered:
March 2003
|
|
Re: osix celica project 001 UPDATED 30.10.2005 progress update pg1
|
Tue, 01 November 2005 03:07
|
|
damn, those who doubted (me included) sucked in.....
Awesome job, cant wait to see teh fi nish product. I rekon, throw away that 1G, might aswell go all out, 1J that bitch!
|
|
|
Location:
Singapore
Registered:
October 2005
|
|
Re: osix celica project 001 UPDATED 30.10.2005 progress update pg1
|
Tue, 01 November 2005 23:15
|
|
for the time i got to use the 1G-Fe engine - my $ is limited 
so i got to make do with what i got - plus would love to try out the car with the 1G-fe engine - before i do any upgrade -
i was suggest to a few engine - eg. 4A-GE and 1JZ - as well as SR20
but i am holding on - as this would cost another big hole in my pocket whahha
The worker is still working on the LEFT driver floor panel today -
it been raining 3 days and cos the car is park just under a wooden shed it starting to rust again  ---
Thanks for all the supoort and i will keep up the work and update everyone with the progress .
the door handle fit - but need to modify some small part insider the trigger .
Osix
|
|
|
Location:
Potts Point, Sydney
Registered:
October 2003
|
|
|
Location:
Singapore
Registered:
October 2005
|
|
|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Re: osix celica project 001 UPDATED 03.11.2005 progress Left Floor Panel
|
Wed, 02 November 2005 22:35
|
|
an amazing photolog ive got to say...
shows what can be said of skill vs resources 
that guy is talented
|
|
|
Location:
Singapore
Registered:
October 2005
|
|
Re: osix celica project 001 UPDATED 03.11.2005 progress Left Floor Panel
|
Thu, 03 November 2005 02:03
|
|
This is still the primany Stage of problem and resource sloving .
the metal and the panel is not hard to find . and is still within reach - stage 2 after the floor panel is done is the hard part .
which will be bumper , window body .
i more or less give up the idea of having a Sunroof installed .
There is still alot of question about my car as well as the engine and Gearbox .
but well i assume i got to slove one by one as the info is also limited .
Mr yaen is a very good , in fact very good skill craftman .
will be trying my best to source for parts ..
so far i had found about 80-90% of the surface part - will be going to malaysia to buy the parking lens .
hope all this gowell ..and thanks fo rthe supoort from everyone
OSIX
|
|
|
Location:
Central Coast, NSW
Registered:
February 2005
|
|
Re: osix celica project 001 UPDATED 03.11.2005 progress Left Floor Panel
|
Thu, 03 November 2005 03:02
|
|
If you've got some spare time, detail that engine while it's out!
Clean it up, degrease it up, spray it.
Also, stuff like the intake manifold can be attacked with metal polish to bring up a nice good shine
Best of luck with your project. I, like others, thought you would just throw in the towel for sure when given the scope of the job ahead of you!
|
|
|
Location:
Potts Point, Sydney
Registered:
October 2003
|
|
Re: osix celica project 001 UPDATED 03.11.2005 progress Left Floor Panel
|
Thu, 03 November 2005 10:25
|
|
|
Show him this thread... He's very talented by the looks of it
|
|
|
Location:
Singapore
Registered:
October 2005
|
|
|
Location:
Singapore
Registered:
October 2005
|
|
|
I supported Toymods
Location:
melbourne
Registered:
June 2002
|
|
Re: Osix Celica Project 001 UPDATED 07.11.2005 -NEW PHOTO UPDATED
|
Fri, 11 November 2005 13:01
|
|
looking cool!
make sure you put all of those badges on, and buy more too! can never have too many badges!
|
|
|
Location:
Bayside Melbourne.
Registered:
May 2003
|
|
|
Location:
Singapore
Registered:
October 2005
|
|
Re: Osix Celica Project 001 UPDATED 07.11.2005 -Gt GRILL - PLATES
|
Fri, 11 November 2005 15:42
|
|
Thanks for the support from everyone
will try hard to make this car a beauty -
the progress is slow but is moving
will hunt for more badge and plate -
and once is ready i will put as much as i can on the car
will keep the projected updated as offen as possible
thanks again to everyone
kindly comment and suggest if you notice i do anything wrong or weir d or i can improve
OSIX
WE LOVE CELICA
|
|
|
I supported Toymods
Location:
south of the big smoke
Registered:
May 2002
|
|
Re: Osix Celica Project 001 UPDATED 07.11.2005 -Gt GRILL - PLATES
|
Sun, 27 November 2005 09:33
|
|
hey mate can ya fix dead links
cheers
|
|
|
Location:
Hills District
Registered:
January 2005
|
|
Re: Osix Celica Project 001 UPDATED 07.11.2005 -Gt GRILL - PLATES
|
Tue, 29 November 2005 04:36
|
|
Lol i love thailand! i went last year and they are awesome at engine conversions! They will fit a 1j into whatever they can shove it into! e.g. utes of any sort: hilux, mazda bravos, 4x4's
volvo 940's, various mercs/bmws etc. also 3sge's into vw passat, chrsler neon, 101 rolla's etc. and there are so many more! i have performance mags to prove it
They are convesrion crazy i couldnt believe it.
Good luck Osix!
|
|
|
Location:
Singapore
Registered:
October 2005
|
|
Re: Osix Celica Project 001 UPDATED 07.11.2005 -Gt GRILL - PLATES
|
Sat, 03 December 2005 19:08
|
|
Been a While since i update the project -
The progress is moving - but i am busy with other personal stuff
Ok i am having some time this few week - and before i get busy again
here the DUE Update for everyone who is following the project .
the progress will be back dated from last month data i collected .
This is a Backdated updated which i posted in another forum .
Here is a More photo for everyone ..
The Floor panel had Been replace - and here is a almost complete shot
Here a Shot of the Centre Rail connection from left to Right
More photo
Here a Compare Shot of BEFORE AND AFTER
There worker is still working on the Left Rail
Here a Corner shot of the Door Rail
The Inner Door Rail section - being replace
I will be going to Bangkok abd Then Malaysia to hunt for TA22 Parts .
wish me luck -
Feel free to comment on the progress and give me advice for improvment .
will be replacing the rear Suspension - KYB ( option)
And alarge whell - hoping to upgrade the Front brake and more ..
Dash board is a mess -
osix
|
|
|
Location:
Singapore
Registered:
October 2005
|
|
Re: Osix Celica Project 001 UPDATED 04.12.2005 -DEAD LINK FIXED NEW PHOTO
|
Sun, 04 December 2005 12:13
|
|
Been really really Busy and finally got some time to update the project .
the Car is about 60% done i guess .
and i hope i can ride it before X'mas .
Here is the Long due update for everyone who is following the project .
- Oh yeh i spend some time washing the Engine and gearbox today -
will try to take some photo tomorrow .
OK - Here we go .
Rims 16" - My friends offer This Set of 16inches rim for me -
and when i Match it with the car it look nice . i guess is a blessing -
Tires and Rims - for $150usd - i think is a good buy .
Oh yeh before i forget
This is the SEAT Bracket that was remade
Now we Had already Finish with the Rear wheel fender ( guard )
here is the few photo i took last week or so .
Here a Look from the INSIDE of the REAR compartment - Pcs by pcs being Weld back -
The rear Disc brake Unit - took a snap shot of it while it out
OSIX
|
|
|
Location:
Singapore
Registered:
October 2005
|
|
Re: Osix Celica Project 001 UPDATED 04.12.2005 -DEAD LINK FIXED NEW PHOTO
|
Sun, 04 December 2005 12:13
|
|
The REAR RIGHT WHEEL COMPLETE .
here a few VIEW of the fender ( guard )
Here a View of the LEFT REAR Wheel before the work Work is Complete
BEFORE -
AFTER
Here another view
CLOSEUP
so far i am Please with the Outcome - and will be adjusting and detailing what is needed .
Today we had started on the FRONT WHEEL -
here a Sneak preview of the Front Fender before the work start ,
THERE IS SUCH A LARGE GAP COS THE ENGINE IS TAKEN OUT .
I AM SO WORRY ABOUT THE ALLOWANCE NEEDED FOR THE WHEEL TO TURN STIR LEFT AND RIGHT _
ANY IDEA WHAT IS MINIMUM SPACE I NEED ?
In fact when i leave the workshop - the FRONT LEFT wheel fender - had already taken Shape - and the bumper ( guard had been form . )
will take more photo tomorrow .
Kindly Advice if you Spot any weird or strange direction i am going .
all this is so new for me .
Please feel free to advice and suggest better way of doing so .
OSIX
WE LOVE CELICA .
|
|
|
Location:
Bayside Melbourne.
Registered:
May 2003
|
|
Re: Osix Celica Project 001 UPDATED 04.12.2005 -DEAD LINK FIXED NEW PHOTO
|
Sun, 04 December 2005 12:41
|
|
That is awesome work. I love seeing the updates on your project. 
Very nice choice on the wheels too. I like that design on a car like yours.
|
|
|
Location:
Singapore
Registered:
October 2005
|
|
Re: Osix Celica Project 001 UPDATED 04.12.2005 -LINK FIXED LOT OF NEW PHOTOs
|
Sun, 04 December 2005 12:49
|
|
Thaks you so Much for Following the Project .
i will keep up the posting and updated it as offen as i can .
I love Those RIMS . will be polishing the RIMS and consider -
chroming it or Painting it .
Once again MANY THANKs to ALL those that Support the posting and following the project ,.
Please feel free to suggest and post and advice if you spot me doing something silly .
OSIX
WE LOVE CELICA
|
|
|
Location:
Bayside Melbourne.
Registered:
May 2003
|
|
Re: Osix Celica Project 001 UPDATED 04.12.2005 -LINK FIXED LOT OF NEW PHOTOs
|
Sun, 04 December 2005 13:00
|
|
If those rims were mine, i wouldn't be chroming them. In my opinion they suit the car as they are. Just fix the scratches and repaint them silver. 
|
|
|
Location:
Perth Western Australia
Registered:
April 2004
|
|
Re: Osix Celica Project 001 UPDATED 04.12.2005 -LINK FIXED LOT OF NEW PHOTOs
|
Sun, 04 December 2005 14:57
|
|
far out i have viewed this thread a few times , but now ive decided to say
BLOODY good work on the restore !
keep it going !
what colour u gonna paint it ?
|
|
|
Location:
Singapore
Registered:
October 2005
|
|
Re: Osix Celica Project 001 UPDATED 04.12.2005 -LINK FIXED LOT OF NEW PHOTOs
|
Sun, 04 December 2005 15:20
|
|
The Color opic is still a Pin in the Sea of choice .
Murderer bloody red
Green green very green
happy fresh orange
moody metallic grey
Chome shiny shine
raw oily black
Bright Super blue
purple metallic Pink
Golden Gun metal yellow
Grow in the dark Lime cream
Simple rosey cream
and the list go on .
i am also considering Pin line as well as other 3-4 tone mixture .
OSIX will post a MOCK up of what color i am choosing in a a week or so time
OSIX
|
|
|
