Hi,
Just wondering or rather hoping someone could tell me how to remove the injectors and cold start injector in my 92 7mge cressida.
The injectors badly need cleaning im hoping (hard starting and flatspots when cold but gets better as engine warms up) could also be cold start injector i guess.
Any help or similar probems would be greatly appreciatted.
It's pretty easy. Remove the plenum first (from memory it bolts to the manifold about half way up the inlet runners), then you'll have access to the fuel rail. Unbolt the fuel rail from the manifold and the whole assembly (injectors and rail) will simply pull out. Make sure you buy new o-rings before you re-install the injectors!
Sat, 17 May 2003 13:45
