Author | Topic |
Location: Tasmania
Registered: May 2002
|
2T-G big cams
|
Thu, 05 June 2003 13:19
|
|
I have a 2T-G, and I want some performace cams for it. Preferably rewelds that maintain lift, or maybe regrinds. About 290 degrees I think, maybe 304 on inlet? e-mail me if you got something.
|
|
|
Location: Carlingford, Sydney
Registered: May 2002
|
Re: 2T-G big cams
|
Fri, 06 June 2003 01:49
|
|
im also after the same size cams for my 2tg as well
so if anyone has 2 pairs let me know
|
|
|
Location: Hornsby, N.S.W
Registered: September 2002
|
Re: 2T-G big cams
|
Sat, 07 June 2003 01:40
|
|
talk to andrew vibert, he can help you guys, he has a set of cams for sale.
justin
|
|
|
Location: Carlingford, Sydney
Registered: May 2002
|
Re: 2T-G big cams
|
Sat, 07 June 2003 16:25
|
|
yeah ive spoken to him
the cams he has wasnt gound properly so they anrt much good
|
|
|
Location: MACKAY
Registered: May 2002
|
Re: 2T-G big cams
|
Sat, 07 June 2003 22:01
|
|
Give Camshaft Engineering a call in Brisbane , I Had my cams reground from them an it cost me $85 including freight , That was about 8 years ago so they would be more now but at that time it was very cheep , the grind I got was 288 degree on both with .400" lift , I put these cams into a 2tg/3t hybrid and pulled a 14.8 in the TA22 .
Trevor
|
|
|
Location: Hornsby, N.S.W
Registered: September 2002
|
Re: 2T-G big cams
|
Sat, 07 June 2003 22:34
|
|
EMP-2TG wrote on Sun, 08 June 2003 02:25 | yeah ive spoken to him
the cams he has wasnt gound properly so they anrt much good
|
what do you mean by not ground properly??
justin
|
|
|
Location: Carlingford, Sydney
Registered: May 2002
|
Re: 2T-G big cams
|
Sun, 08 June 2003 02:09
|
|
juzzo - it was only 1 of the 584 cams dunno what was wrong
ta22-3dgte - id love to know some specs of your old 2tg
any info would be great
|
|
|
Location: Hornsby, N.S.W
Registered: September 2002
|
Re: 2T-G big cams
|
Sun, 08 June 2003 05:32
|
|
no worries man!!! thanks for that
justin
|
|
|
Location: Brisbane
Registered: November 2002
|
Re: 2T-G big cams
|
Sun, 08 June 2003 12:04
|
|
Got a number/website for Camshaft Engineering? I looked on the net but the camshaft engineering place that came up was in WA?
|
|
|
Location: nth ringwood, Victoria
Registered: August 2002
|
Re: 2T-G big cams
|
Mon, 09 June 2003 02:04
|
|
tighe engineering in brisbane do hard face as does camtec in sydney and clive cams in melbourne ,also remember when you just do aregrind you will loose heaps off the base circle ,then you will have to get shims made up that are about 4mm thick ,where hard faced cam s only take off about 10thou in most cases also if the cam is 2 hot it will crap to drive so think of what you really wont cause most power wont be to 5000 if it is a 1600 with the specs you are talking about ,im running 296 duration and they are 266 at 50 thou so nothing to 5000 and thats a 2 liter 3sge engine and it goes out to 8800 rpm
|
|
|
Forum Sponsor
Location: Shepparton (Vic)
Registered: May 2002
|
Re: 2T-G big cams
|
Wed, 11 June 2003 23:39
|
|
You have just got my memory going. When wade ground my first lot of cams they forgot to weld them first. The base circle is wrong on one of the cams. So I have good 1-584 grind cam for sale. $75 + freight. Wade can grind a mate for it. I will give you the cam that is incorrect so it can be welded and ground correctly.
|
|
|
Forum Sponsor
Location: Shepparton (Vic)
Registered: May 2002
|
Re: 2T-G big cams
|
Wed, 11 June 2003 23:40
|
|
You have just got my memory going. When wade ground my first lot of cams they forgot to weld them first. The base circle is wrong on one of the cams. So I have good 1-584 grind cam for sale. $75 + freight. Wade can grind a mate for it. I will give you the cam that is incorrect so it can be welded and ground correctly.E mail me
|
|
|
Location: Hornsby, N.S.W
Registered: September 2002
|
Re: 2T-G big cams
|
Thu, 12 June 2003 10:39
|
|
andrew, just checking that the cams you sold me are OK???
justin
|
|
|
Forum Sponsor
Location: Shepparton (Vic)
Registered: May 2002
|
Re: 2T-G big cams
|
Thu, 12 June 2003 22:55
|
|
No Problems with the ones you have .
|
|
|
Location: Hornsby, N.S.W
Registered: September 2002
|
Re: 2T-G big cams
|
Fri, 13 June 2003 09:07
|
|
thanks andrew
justin
|
|
|