Author | Topic |
Location: Aucks NZ
Registered: June 2002
|
GEX-2 2tgeu -What do ya know bout em?
|
Mon, 08 July 2002 09:11
|
|
was surprised to find that my TE71 sprinter ive had sitting on my back lawn for the last two years is a 'GEX-2' version of 2tgeu. has gex-2 written above '2tgeu' lettering on timing chain cover. also the ecu has black painted on top and bottom.
got any web links for info on this version?
ive heard they're a factory hotted up version
|
|
|
Location: Aucks NZ
Registered: June 2002
|
Re: GEX-2 2tgeu -What do ya know bout em?
|
Wed, 10 July 2002 06:48
|
|
anyone?
would be very interested in the differences between a std 2tgeu
|
|
|
Club President I supported Toymods
Location: Sydney
Registered: May 2002
|
Re: GEX-2 2tgeu -What do ya know bout em?
|
Wed, 10 July 2002 08:54
|
|
On the front of the head is there any head series numbers ?
If not then take of the rocker/tappet cover and look at the cams. On the long flat part at the front of the cam (where you can put a spanner) on one side is the cam part number. The part after the dash is the head series number in your case it should be -88262 which is apparently the very last of the 2TGEU's.
Thats about all I can tell you sorry.
The racing 2TG also had no numbers but was the FIRST series.
|
|
|
Location: Aucks NZ
Registered: June 2002
|
Re: GEX-2 2tgeu -What do ya know bout em?
|
Wed, 10 July 2002 09:20
|
|
hey cheers for that
the head has got numbers after the 11111- etc.
so the cam number on the 'flat' matches the head number. cool.
|
|
|
Location: New Zealand
Registered: May 2002
|
Re: GEX-2 2tgeu -What do ya know bout em?
|
Wed, 10 July 2002 10:02
|
|
um, i have a 265 intake manifold
|
|
|
Club President I supported Toymods
Location: Sydney
Registered: May 2002
|
Re: GEX-2 2tgeu -What do ya know bout em?
|
Thu, 11 July 2002 00:09
|
|
Karl,
What Numbers are on your head/cams tho ???
I know there were a few different Intake manifolds but I have no idea how they varied.
|
|
|
Location: Tasmania
Registered: May 2002
|
Re: GEX-2 2tgeu -What do ya know bout em?
|
Thu, 11 July 2002 00:56
|
|
My EFI manifold is -88262. And it has "EFI" written on it. It has the newer stud pattern. Its not in use right now.
|
|
|
Location: Aucks NZ
Registered: June 2002
|
Re: GEX-2 2tgeu -What do ya know bout em?
|
Fri, 12 July 2002 08:27
|
|
head # is 11111-88260 ecu toyota code is the #12030 nd=0273 also the ecu label is orange
so its not the last version 2tgeu its also got small cam lettering which i think wasn't as good as the big lettering (something to do with compression or valve size or somethin)
do the efi manifolds have different mounting patterns? the solex-mikunis i have fit the spare 2tgeu so i didn't think they changed at all. am i wrong?
|
|
|
Location: Tasmania
Registered: May 2002
|
Re: GEX-2 2tgeu -What do ya know bout em?
|
Fri, 12 July 2002 08:38
|
|
The bolt pattern is one hole different, but it doesn't matter. Still fits, minus that bolt.
|
|
|