| Author | Topic |
|---|
Location:
Brisbane (AUS)
Registered:
August 2003
|
|
Carby to EFI
|
Mon, 11 August 2003 02:52
|
 |
Hey, i have a single cam carby 1986 AE82 corolla seca and i will be putting in the 20 valve conversion very soon. i am just wondering about the EFI stuff. is it had to convert my car to EFI and is it really expensive or is there another cheaper way of doin it.
Thanks your imput is greatly appreciated 
|
|
|
Location:
Adelaide
Registered:
July 2002
|
|
Re: Carby to EFI
|
Tue, 12 August 2003 12:46
|
|
efi tank and fuel lines to convert plus u might have to add wiring to the tank to power the efi pump in the tank.
do a search dude this has been covered in detail over and over and over and over and over and over
Cheers
|
|
|
Location:
Brisbane
Registered:
February 2003
|
|
Re: Carby to EFI
|
Tue, 12 August 2003 13:30
|
|
although this FAQ <http://members.shaw.ca/megasquirt/MS%20FAQ.htm> is related to megasquirt (a DIY EFI system that you build yourself), it's still got a fair amount of stuff on setting up your own EFI system.
Also, these folk <http://www.sdsefi.com/tech.html>have a good technical section worth reading - even if it's a Canadian site
oh, you gotta search this site too for "AE82" or "20V" then spends a few hours reading all the links they return... will be well worth your time.
As you will probably want the EFI gear from a 20V engine - because cheap really means doing it yourself (if you're up to it) - and if you get things wrong, then you burn cash at an alarming rate...
Charles.
|
|
|
