| Author | Topic |
|---|
Registered:
May 2002
|
|
Difference between 20valve Auto and 20 Valve Manuel
|
Wed, 27 August 2003 05:48
|
 |
Hi All,
Quick question,Is there any difference between a 20valve with an auto box and a 20valve with a manuel box.
Is there any difference with the engine or is it just the box.
regards
Will
|
|
|
Location:
Perth
Registered:
May 2003
|
|
Re: Difference between 20valve Auto and 20 Valve Manuel
|
Wed, 27 August 2003 06:00
|
|
yes there is the auto box is shit.
there would be no differnce in the engine itself
|
|
|
Registered:
May 2002
|
|
Re: Difference between 20valve Auto and 20 Valve Manuel
|
Wed, 27 August 2003 06:04
|
|
ok thanks.
I only wanted it for the engine.
cheers
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
Re: Difference between 20valve Auto and 20 Valve Manuel
|
Wed, 27 August 2003 06:09
|
|
There may be some difference in the ECU (if it concerns you), not sure might want to check up on that from someone who knows!
But the actual engines them selves should be identical otherwise.
Cheers
Wilbo
|
|
|
Location:
Parramatta
Registered:
July 2002
|
|
Re: Difference between 20valve Auto and 20 Valve Manuel
|
Wed, 27 August 2003 22:37
|
|
|
the rev limiter is lower in the auto and wiring it up to a manual car is a pain in the arse.... i lernt this the hard way when i did my conversion i strongly recomend getting a manual ecu and harness
|
|
|
Registered:
May 2002
|
|
Re: Difference between 20valve Auto and 20 Valve Manuel
|
Thu, 28 August 2003 01:32
|
|
The reason i was asking is that i can get a 20valve Engine with auto gearbox cheap, no wiring or computer.
So there isn't any difference in engines just the wiring and computer.
Cheers
Will
|
|
|
