Author | Topic |
Location: Canberra
Registered: May 2002
|
SC-14 mounting bracket and air bypass valve
|
Sun, 28 September 2003 13:12
|
|
Ok I need quite desperatly the above mentioned mounting bracket for the SC-14 onto the 1G-GZE. And the air bypass valve that sits on the top of the intake manifold (not sure if there is any other ones just thought I'd be specific...)
Thanks
-Anthony
|
|
|
Location: sydney
Registered: June 2003
|
Re: SC-14 mounting bracket and air bypass valve
|
Wed, 08 October 2003 09:57
|
|
iv got both of them but im in sydney
|
|
|
Location: Canberra
Registered: May 2002
|
Re: SC-14 mounting bracket and air bypass valve
|
Thu, 09 October 2003 03:18
|
|
Hey,
Thats cool, i dont mind going on a road trip, might have to go the motor show while i'm at it... How much do you want for them?
-Anthony
|
|
|
Location: sydney
Registered: June 2003
|
Re: SC-14 mounting bracket and air bypass valve
|
Sat, 11 October 2003 08:27
|
|
$40 for both
let me know if ya want any other bits cause i have a whole motor spare.
|
|
|
Location: Canberra
Registered: May 2002
|
Re: SC-14 mounting bracket and air bypass valve
|
Sun, 12 October 2003 03:09
|
|
Ah cool, there are some other bits i am after actually, I would be interested in getting the whole intake side of the motor if it you have it all. Is it all still together?
|
|
|
Location: sydney
Registered: June 2003
|
Re: SC-14 mounting bracket and air bypass valve
|
Tue, 14 October 2003 10:19
|
|
the only bit im using off the whole engine is the inlet manifold runners. the rest of the engine is up 4 sale except for the blower and the sump which were missing when i bought it
|
|
|
Location: PNG
Registered: June 2002
|
Re: SC-14 mounting bracket and air bypass valve
|
Tue, 14 October 2003 23:02
|
|
Pardz
I have an inlet manifold if you want one.
Craig
|
|
|
Location: Canberra
Registered: May 2002
|
Re: SC-14 mounting bracket and air bypass valve
|
Wed, 15 October 2003 01:11
|
|
twinturbo86: Thats should be fine, not sure exactly what manifold runners are, but i am mostly after the throttle position sensor thing and to see it all together (i got mine in a disassembled state), figured if you had it all there i may as well get it from you.
ddeane: thanks for the offer, i will give you a call if i end up needing it.
|
|
|
Location: sydney
Registered: June 2003
|
Re: SC-14 mounting bracket and air bypass valve
|
Wed, 15 October 2003 08:25
|
|
the throttle position sensor is on the throttle body, is that the piece u mean
the inlet manifold runners is the part that comes directly off the inlet side of the head
|
|
|
Location: Canberra
Registered: May 2002
|
Re: SC-14 mounting bracket and air bypass valve
|
Wed, 15 October 2003 15:50
|
|
Yeah its on the manifold. How much do you want do want for it all? I will have to work out my shifts for next week and see when I'm free so I can come get this stuff...
|
|
|
Location: sydney
Registered: June 2003
|
Re: SC-14 mounting bracket and air bypass valve
|
Thu, 16 October 2003 09:43
|
|
for $50 you can have all the bits that go on the manifold (except injectors) and i'll throw in a blower bracket
|
|
|
Location: Canberra
Registered: May 2002
|
Re: SC-14 mounting bracket and air bypass valve
|
Fri, 17 October 2003 01:57
|
|
Sounds good to me!! I will get my shifts for next week tonight, and figure out when I can make it up there to get this stuff. Can you PM me your number so I can get your address and let you know when I can make etc etc?
Cheers
-Anthony
|
|
|