| Author | Topic |
|---|
Location:
Hornsby, N.S.W
Registered:
September 2002
|
|
2tg/3t hybrid owners, have you had this problem
|
Sat, 18 October 2003 06:01
|
 |
this relates to guys who built there own hybrid motor. when in the building process, did the conrod cap bolts every touch the block of the engine when turning it over by hand!!!
thanks for your help guys!!!
justin
|
|
|
I supported Toymods
Location:
melbourne.victoria.austra...
Registered:
June 2002
|
|
Re: 2tg/3t hybrid owners, have you had this problem
|
Sat, 18 October 2003 06:56
|
|
justin i remember reading that some of the early blocks had this problem but the late ones (ie: the 2TGEU) didn't.
nothing a burr and dremel won't fix...(but don't go overboard)
|
|
|
Location:
Hornsby, N.S.W
Registered:
September 2002
|
|
Re: 2tg/3t hybrid owners, have you had this problem
|
Sat, 18 October 2003 06:57
|
|
|
it is a 2tgeu block that i am using, its on the crank that is the prob, its the bottom of the bore!
|
|
|
Location:
Tasmania
Registered:
May 2002
|
|
Re: 2tg/3t hybrid owners, have you had this problem
|
Sat, 18 October 2003 13:33
|
|
|
I am using a 3T block, so there is no way I would have a problem like that myself. But like the other guy said, just grind the block away where needed.
|
|
|
Location:
Hornsby, N.S.W
Registered:
September 2002
|
|
Re: 2tg/3t hybrid owners, have you had this problem
|
Sat, 18 October 2003 23:02
|
|
yeah, it should not be a problem, i just wanted to know if anyone else has suffered the same fate!!!
thanks
justin
|
|
|
Location:
Melbourne
Registered:
October 2003
|
|
Re: 2tg/3t hybrid owners, have you had this problem
|
Mon, 20 October 2003 01:45
|
|
i'm in the process of doing the same thing,
haven't tried fitting the crank yet as i don't have the specs for
toqueing down the main caps litte ends etc.
My block is also a 2t-geu.
Is it possible your original block was blown up and the head and internals transfered to another 2t block?
I'll see if i get the same problem.. i hope not!!!
|
|
|
Location:
Melbourne
Registered:
October 2003
|
|
Re: 2tg/3t hybrid owners, have you had this problem
|
Sun, 16 November 2003 03:11
|
|
yep no problems with clearance.. 2t-geu block it must be.
|
|
|
Location:
Hornsby, N.S.W
Registered:
September 2002
|
|
Re: 2tg/3t hybrid owners, have you had this problem
|
Sun, 16 November 2003 07:31
|
|
|
sure is a 2tgeu block
|
|
|
