Toymods Car Club Inc: Tech & Conversions => ECU pin outs

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » ECU pin outs Show: Today's Posts :: Show Polls Email to friend

Author

Topic

Registered:
June 2002

ECU pin outs	Wed, 31 July 2002 02:56

Can someone please confirm that the "Battery" pin on the attached pic is in the correct place, and it is a Black & yellow wire comming from the ECU plug. Soarer JZZ30 loom/ECU The reason I ask is because I can't seem to find the other end in any of the plugs I have leftover (checking with the multimeter). Or does someone know were to find the power input to the loom? Thanks Glenn [Updated on: Wed, 31 July 2002 20:45] [Report message to a moderator]

Registered:
June 2002

Re: ECU pin outs	Wed, 31 July 2002 20:52

Sorry if the pic doesn't come up here is the link http://www.geocities.com/ggclhm1/ecupinouts.jpg Hopefully that works. Anyway had another session with the multimeter last night and found some funny things (I think they're a bit weird), Are the findings usual. The GROUND (near the battery in the pic) goes to one of the injector earths the other GROUND goes to the Map Sensor plug (that seems weird!)?? The O2 SENSOR is the terminal to the left of the A/T spd2 -ve. I couldn't find where the RPM2 and SPEED terminal go. Bloody wiring!! Well that link didn't work either!! Am I just monkeying it up or is Geoshities not a very good place to link things to?? Glenn [Updated on: Wed, 31 July 2002 20:55] [Report message to a moderator]

1G-GE KE35
Occasional Poster

Location:
Welly, NZ
Registered:
July 2002

Re: ECU pin outs	Wed, 31 July 2002 22:30

Glenn, Try taking the www. out of the URLs, works for me!! Sam [Report message to a moderator]

Registered:
June 2002

Re: ECU pin outs	Thu, 01 August 2002 00:19

I did try that, Still the same!! F*#k ARSE thing!! [Report message to a moderator]

1G-GE KE35
Occasional Poster

Location:
Welly, NZ
Registered:
July 2002

Re: ECU pin outs	Thu, 01 August 2002 00:33

Geoshities is crap. If you go to the link and then take out the www. it will prolly work........ [Report message to a moderator]

gianttomato
Forums Junkie

I supported Toymods

Location:
I renounced punctuation
Registered:
May 2002

Re: ECU pin outs	Thu, 01 August 2002 01:20

Or cut and paste. [Report message to a moderator]

Registered:
June 2002

Re: ECU pin outs	Thu, 01 August 2002 03:32

I think we are getting a bit Off topic here guys. Can anyone shed some light on the mysteries of wiring?? Glenn [Report message to a moderator]

BlakeNZ
Occasional Poster

Registered:
May 2002

Re: ECU pin outs	Thu, 01 August 2002 07:34

Sorry Glenn,I can't help with electrical advice. However,I can offer some assistance to your bank balance if you were interested in copying your engine mounts for me,as I'm looking to do the same conversion as you. With regard to ECU pinouts,do you mean "battery" as in the 'power' feed to the ECU?I have a few diagrams. [Report message to a moderator]

deesonet
Regular

Location:
Toowoomba
Registered:
May 2002

Re: ECU pin outs	Thu, 01 August 2002 11:52

Glenn Yes, leave the www out and I can see the diagram. I have 4 plug and 5 plug wiring diagrams for the 1JZ-GTE. It appears that the JZZ has a different version again. If my diagrams are any help I can send them. [Report message to a moderator]

Registered:
June 2002

Re: ECU pin outs	Thu, 01 August 2002 20:55

Are all the wiring guru's on holiday at the moment?? [Report message to a moderator]

Previous Topic:	Strange things have happened to my idle
Next Topic:	Sensors on 18RGEU???

Current Time: Sun May 5 04:43:42 UTC 2024

Total time taken to generate the page: 0.005652904510498 seconds

.:: Contact :: Home ::.