| Author | Topic |
|---|
Location:
Brisbane
Registered:
May 2002
|
|
MA61 adjustable rear camber
|
Thu, 18 December 2003 00:01
|
 |
Hi all,
I thought some of you might be interested to know that Paul Pyyvaara in conjunction with RallyTorque Motorsport has completed development of an MA61 rear crossmember which allows camber adjustment on the rear wheels. This should be especially useful for those of us who have lowered suspension and thus way too much rear camber!
Pics can be found on Paul's web site:
http://www.onthenet.com.au/~paulp/supra/
A quote from the man himself:
| Quote: |
The only thing we ask is that if anyone in SEQLD wants this done they go to RallyTorque and not another engineering shop who copies from the net. We can ask but not police of course .... but that is why there are no instructions or measurements.  For DIY folks it should not be too hard to work out and I am not fussed about that.
|
So if you have a chat to RallyTorque you can have your very own adjustable camber crossmember. Estimated cost is $290 with customer supplied crossmember, not fitted.
http://www.rallytorque.com.au/
|
|
|
I supported Toymods
Location:
I renounced punctuation
Registered:
May 2002
|
|
Re: MA61 adjustable rear camber
|
Thu, 18 December 2003 00:15
|
|
|
Exactly what I had pictured - slotting with eccentric camber bolts. Sweet.
|
|
|
Location:
Adelaide
Registered:
September 2003
|
|
Re: MA61 adjustable rear camber
|
Thu, 18 December 2003 01:28
|
|
Hiya Norbs,
Looks sweet. As for being almost as far away from NEQLD as you can get (except for Perth guys), can you 'purchase' the required parts as well as somemeasurements from Rally Torque to at least offer them the support for the work they did with Paul ?
What is the difference in the supports ? New ones, or did they just slot the mounts and brace the mounts (to enable the camber/offset bolt to work) ?
Look forward to your trial Norbs
Cheers
Michael B
|
|
|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Re: MA61 adjustable rear camber
|
Thu, 18 December 2003 01:48
|
|
*doo di dooo*
(scribbles down diagram and runs to his machinist)
nice one paul/norbs!
i was literally about to do the same thing. nice to know it works!
cheers
ed
|
|
|
Location:
Adelaide
Registered:
June 2002
|
|
Re: MA61 adjustable rear camber
|
Thu, 18 December 2003 09:04
|
|
Very nice!
Just as well I have a spare crossmember sitting in my shed..
And I'm with Michael, being able to purchase the brackets and bolts etc would be a good option for those nowhere near SE QLD.
|
|
|
