Re: ta23 workshop manual and 18r front well sump and pickup to suit ta23 crossmember
Sat, 03 January 2004 03:43
if you're putting an 18R engine into a TA23 you just need to change the engine x-member to one out of an RA23, as far as I know there is no different sumps for the 18r engines but the RA23 xmember bends forwards to suit the 18r engine.
Re: ta23 workshop manual and 18r front well sump and pickup to suit ta23 crossmember
Sat, 03 January 2004 03:59
there are different sumps netween the 76 celica 18r and the 78ish coronas with 18r's in them. the corona has the sump mounted towards the front where as the celica has it in the middle. i have used my ta23 crossmember. I have lowered it about 30mm and then used some rx7 rubber engine mounts which joins the crossmember to the engine. It all worked out good to. I had to do it that was as i couldnt get a ra23 crossmember. except from some rip off dude who wanted alot for it. so if someone has the sump let me know please
Fri, 02 January 2004 23:39
