Author | Topic |
Location: Osama's hideout
Registered: February 2003
|
1JZ CRESSIDA BITS AN PIECES
|
Thu, 30 October 2003 02:47
|
|
POD FILTER SET UP, PUTS FILTER IN BEHIND DRIVER SIDE HEAD LIGHT, IT MADE TO FIT A 114MM POD FILTER. PAINTED SILVER IN HEAT PROOF GEL PAINT GLOSS FINISH. $250 ONO
1JZ TURBOS, PERFECT CONDITION, NO MOVEMENT SIDEWAYS OR LONGTITUDAL. SET $750 ONO.
ALL PIPE WORK FOR STANDARD TWIN TURBOS OUT OF A JZX81 CHASER.
OFFERS
1JZ COIL PACKS COMPLETE SET OF SIX REASONABLE OFFERS.
JZX81 STANDARD COMPUTER REASONABLE OFFERS
STANDARD 1JZGTE INJECTORS AND FUEL RAIL, 380CC SIDE FEED REASONABLE OFFERS.
3.5 INCH RACE CAT PIPE, IE ONLY FOR USE ON A RACING CIRCUIT, $100.
I AM LOCATED IN NEWCASTLE/CENTRAL COAST AREA
SHANE.
|
|
|
Location: sydney
Registered: June 2002
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Thu, 30 October 2003 03:54
|
|
hey man ill give u $200 for the coil packs
|
|
|
Location: Osama's hideout
Registered: February 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Thu, 30 October 2003 04:15
|
|
importers want $100 per coil pack if they have them. i just tried 3 importers and only one place has a set which are in a halfcut. so PM me Goku, with a higher price and we can do something.
thanks
shane
|
|
|
Registered: May 2002
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Thu, 30 October 2003 04:50
|
|
Shane,
Are you selling the CAI that you had on the car? If so, I'd be interested in the lot (up to where I can match it with my existing intake - behind where the stock airbox sits).
If you are selling it all, please let me know how much.
|
|
|
Location: Osama's hideout
Registered: February 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Thu, 30 October 2003 04:55
|
|
no, im just selling the section from the pod filter( the silver pipe and rubber elbow as seen at dubbo) to the factory intake piping, the actual box and air deverter i am keeping as it can be used with the new set up.
thanks
shane
hows the big 8 going?
|
|
|
Location: sydney
Registered: September 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Thu, 30 October 2003 13:39
|
|
ill start on the standard intake pipes $50
|
|
|
Location: perth-fremantle
Registered: August 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Thu, 30 October 2003 16:09
|
|
hey mate...got the rotor for the front?
|
|
|
Registered: May 2002
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Thu, 30 October 2003 22:05
|
|
1JZ.747 wrote on Thu, 30 October 2003 15:55 |
hows the big 8 going?
|
It's going quite nicely! I'm debating taking it to the Wakefield drags on Sunday...Depends on the weather.
|
|
|
Location: Osama's hideout
Registered: February 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Thu, 30 October 2003 22:30
|
|
what do you mean supra R? speak english
|
|
|
Location: melb
Registered: June 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Thu, 30 October 2003 23:31
|
|
Is this a wrecking yard or private seller selling these bits.
|
|
|
Location: Osama's hideout
Registered: February 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Thu, 30 October 2003 23:33
|
|
private sale.
if you go into the dubbo nationals from this year you will see my car 1JZ.747 rego.
i am changing my setup and are selling items.
why do you ask?
|
|
|
Location: perth-fremantle
Registered: August 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Fri, 31 October 2003 14:02
|
|
me? english...no speaking...haaa
just jocking
i mean the front disc brakes
sorry mate...my doggy spelling.
|
|
|
Location: perth-fremantle
Registered: August 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Sat, 01 November 2003 15:06
|
|
hey
it seems you had a half cut somewhere somehow?
can i know where/who from? i been looking for one but none offer help.
some guy from this forum told me soem places, but they cant do anything either.
|
|
|
Location: Osama's hideout
Registered: February 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Sun, 02 November 2003 06:17
|
|
the importers i got my halfcut from i wouldnt recommend to my worst enemy.
i am using standard mx83 front brakes, though soon will be upgrading to VT twin spot callipers and 330mm rotors.
this wont be for a few months though.
|
|
|
Location: perth-fremantle
Registered: August 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Mon, 03 November 2003 07:14
|
|
ok.
thanks anyway
|
|
|
Location: Osama's hideout
Registered: February 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Tue, 11 November 2003 23:07
|
|
intake pipes sold.
|
|
|
Location: Adelaide, SA
Registered: May 2002
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Wed, 12 November 2003 00:27
|
|
Do you have the stock 1jz exhaust manifolds for sale?
|
|
|
Location: Osama's hideout
Registered: February 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Wed, 12 November 2003 01:22
|
|
yes i do, make me an offer.
|
|
|
Location: Sydney
Registered: May 2002
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Wed, 12 November 2003 02:55
|
|
i used asian autos in slacks creek and they were really cool to deal with....
|
|
|
Location: Osama's hideout
Registered: February 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Wed, 12 November 2003 03:10
|
|
mx83 toy, what is your point exactly? and who mentioned asians?
|
|
|
Location: Sydney
Registered: May 2002
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Thu, 13 November 2003 11:58
|
|
thats the name of the importers i used they were cool... hows the beast going??? i got no cash to make mine any faster oh well more O/T
|
|
|
Location: Sydney
Registered: November 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Thu, 13 November 2003 12:33
|
|
Hi shane,just a short note 2 let u know dumps r good, waitin on box from adelaide, will pm u when back on road, hav 2 b re-tuned told 2 expect between 240-260kw at wheels, u know who i am, dont let this user name fool u. Thanks mate...
|
|
|
Location: Osama's hideout
Registered: February 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Thu, 13 November 2003 23:02
|
|
its hibernating.
|
|
|
Location: Osama's hideout
Registered: February 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Thu, 13 November 2003 23:02
|
|
and that's great Richard.
|
|
|
Location: Osama's hideout
Registered: February 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Wed, 19 November 2003 00:06
|
|
one set of coils gone.
have another set of six.
1UZMX83
how much would you pay for the cold air induction setup?
i may sell it to you and make another one.
|
|
|
Location: Osama's hideout
Registered: February 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Thu, 27 November 2003 05:15
|
|
pod filter set up sold.
|
|
|
Location: Melbourne
Registered: May 2002
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Fri, 28 November 2003 05:00
|
|
supra R did i buy my supra off u? do u have supra R plates i got a fine about a month back from WA for not returning the plates i never got with it? WTF? if its not u then FORGET IT!
|
|
|
Location: perth-fremantle
Registered: August 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Fri, 28 November 2003 05:48
|
|
you are wrong man.....
i had the white supra not the black you bought..
i have seem it on the paper few months back...
that is a very fast car
|
|
|
Location: Melbourne
Registered: May 2002
|
|
|
Location: perth-fremantle
Registered: August 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Sat, 29 November 2003 15:43
|
|
thanks due....
|
|
|
Location: Osama's hideout
Registered: February 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Mon, 08 December 2003 02:37
|
|
cold air induction sold.
|
|
|
Location: Rocklea qld
Registered: February 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Mon, 08 December 2003 07:32
|
|
how much for the injectors. Would they fit a 18rgeu fuel rail and wiring.
|
|
|
Location: Osama's hideout
Registered: February 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Mon, 08 December 2003 23:23
|
|
i have no idea whether they will fit in that fuel rail.
$250 for the six.
|
|
|
Location: Osama's hideout
Registered: February 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Tue, 16 December 2003 00:42
|
|
bump
|
|
|
Location: Adelaide
Registered: September 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Tue, 16 December 2003 01:03
|
|
Hiya,
I'm interested in the cat converter. Still have it ?
If so, PM me with some more details and a price that you'd accept with shipping to Adelaide, and we might have a deal
Cheers
Michael B
|
|
|
Location: Osama's hideout
Registered: February 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Wed, 17 March 2004 01:57
|
|
[B]STILL FOR SALE[/B
[B]STANDARD TURBOS EXCELLENT CONDITION
$600 ONO[/B]
HKS FUEL CUT DEFENDER
$200 ONO
JZX81 CHASER STANDARD COMPUTER
OFFERS
STANDARD INJECTORS AND FUEL RAIL
$200
GTR FRONT MOUNT INTERCOOLER FROM R32 STILL HAS CALSONIC STICKER ON IT.
|
|
|
I supported Toymods
Location: Epping, Sydney
Registered: May 2002
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Wed, 17 March 2004 02:13
|
|
dimensions and price on that gtr front mount?
|
|
|
Location: Osama's hideout
Registered: February 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Wed, 17 March 2004 02:24
|
|
it is a standard nissan GTR front mount intercooler. ie it came out of a nissan GTR it isnt a crappy aftermarket one.
600 X 300 X 76
|
|
|
Location: Forrestfield, WA
Registered: August 2002
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Wed, 17 March 2004 02:25
|
|
Any of you lot have a powersteering rack to suit a jza70 at all ?
- Russ
|
|
|
Location: Osama's hideout
Registered: February 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Wed, 17 March 2004 02:54
|
|
sorry draven you asked for a price.
the going rate seems to be between $750 and $950.
i would be happy with say $700.
|
|
|
Location: NSW, East Coast
Registered: July 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Wed, 17 March 2004 11:42
|
|
1JZ.747 wrote on Sun, 02 November 2003 17:17 | the importers i got my halfcut from i wouldnt recommend to my worst enemy.
|
Didnt you have gearbox issues with Asian Auto Spare in QLD.
Let me know what parts you have left after everyone has a pick, i know someone who might be up for another 1j cressy conversion.
Steve
|
|
|
Location: Osama's hideout
Registered: February 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Wed, 17 March 2004 23:20
|
|
thats all i have spare steve, all the turbo pipes, manifolds, turbos. fuel cut defender. GTR intercooler, i havent had it in my car a guy swapped it for my JZX81 standard setup. standard ECU. i will have standard gearbox shifter as i have a pro rachet now. thas about it.
is trent going to go through the greif again.
|
|
|
I supported Toymods
Location: Epping, Sydney
Registered: May 2002
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Wed, 17 March 2004 23:52
|
|
just letting you know I'll pass on the intercooler, but thanks for the info
|
|
|
Location: NSW, East Coast
Registered: July 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Thu, 18 March 2004 00:16
|
|
Yep, he loved it so much the first time his at it again.
He really only sold it because he borrowed a bit of money to join the police force and that money had to be returned and because you can only get austudy ($350 a fornight) while in training for 6mths, makes it kinda hard to repay any debts, but he is home free got a good wage and he is back on the boat.
Although once the original 1j was put in it had a blown head and the front turbo was shagged, so he changed it to another 1j by himself and it wasnt all that hard. All the hard work was done.
So he is searching for a grande as we speak so he can have the lsd and abs.
|
|
|
Location: Osama's hideout
Registered: February 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Thu, 18 March 2004 05:44
|
|
well i will ring him cause i know of a mint one for good money.
|
|
|
Location: NSW, East Coast
Registered: July 2003
|
Re: 1JZ CRESSIDA BITS AN PIECES
|
Thu, 18 March 2004 09:24
|
|
Is that the one he talk about earlier.
Build a car just too sell it and then buy it back.
|
|
|