Author | Topic |
Toymods Board Member I supported Toymods
Location: Turramurra, Sydney.
Registered: May 2002
|
turbo, 'cooler, cam gears, calipers etc
|
Fri, 19 March 2004 05:33
|
|
It's about time I cleared out all this stuff, and I could do with the cash.
Prices are negotiable.
Pictures of all of these items are further down in the thread.
Volvo 4 piston calipers, 100mm bolt spacing. Direct bolt onto corona ST141 struts.
$250
Custom sump for 4AG, has bulge at rear. To suit a forward curving crossmember (RWD). Includes modified oil pickup.
$200
$AGE Adjustable Cam Gear inserts, to suit 100kW cam gears.
$200
JZA-70 Factory Intercooler, 550x330x70, including tanks, 55mm in & out.
Pic & info here: http://board.performanceforums.com/forums/showthre ad.php?s=&threadid=67139728&highlight=diff erence+JZA70+MA70
$300
RB20DET Ball Bearing turbo, in good condition, compressor housing has been filed back & shotpeened. Comes with wastegate actuator, factory dump, compressor outlet pipe, & spare compressor & turbine housings.
$350
RWD extractors to suite 4A-GE, 4-2-1, made by Liverpool Exhaust.
$200
Microtech MT-8, with brand new loom, plus coil & ignitor, to suite a 4AGE.
SOLD
4A-GZE Genuine Toyota Head Gasket, brand new.
SOLD
G/M/JZA-70 Brake Master Cylinder, 25mm bore, direct bolt on replacement to R/TA23 & RA28s.
SOLD
PICTURES FURTHER DOWN.
[Updated on: Tue, 06 April 2004 13:19]
|
|
|
Location: Oakleigh, Melbourne
Registered: August 2003
|
Re: Lots of good stuff.....
|
Fri, 19 March 2004 12:48
|
|
is the turbo a T28?
|
|
|
Toymods Board Member I supported Toymods
Location: Turramurra, Sydney.
Registered: May 2002
|
|
|
Location: Perth
Registered: August 2003
|
Re: Lots of good stuff.....
|
Fri, 19 March 2004 18:22
|
|
just a question, how much of a difference would them volvo calipers make if put on a st141 corona?
|
|
|
Toymods Board Member I supported Toymods
Location: Turramurra, Sydney.
Registered: May 2002
|
Re: Lots of good stuff.....
|
Sat, 20 March 2004 00:32
|
|
I imagine it'd be a pretty big difference. They fit over the standard solid disc but it would be very easy to make up some spacers & fit them over thicker vented discs too.
You may need a larger master cylinder too.
|
|
|
I supported Toymods Banned User
Location: Brisbane
Registered: May 2002
|
Re: Lots of good stuff.....
|
Sat, 20 March 2004 00:36
|
|
Is the JZA70 cooler the one in the bottom of the picture?
|
|
|
Toymods Board Member I supported Toymods
Location: Turramurra, Sydney.
Registered: May 2002
|
Re: Lots of good stuff.....
|
Sat, 20 March 2004 06:05
|
|
Yep, the bigger one.
|
|
|
I supported Toymods Banned User
Location: Brisbane
Registered: May 2002
|
Re: Lots of good stuff.....
|
Sat, 20 March 2004 06:23
|
|
Ok. Do you have pictures of yours? Whats the fins like? Any damage?
|
|
|
Toymods Board Member I supported Toymods
Location: Turramurra, Sydney.
Registered: May 2002
|
|
|
Location: Adelaide
Registered: May 2003
|
Re: Lots of good stuff.....
|
Sat, 20 March 2004 06:53
|
|
I assume that the Microtech comes with everything needed to just plug it into a 4A?
If so $600.
|
|
|
Toymods Board Member I supported Toymods
Location: Turramurra, Sydney.
Registered: May 2002
|
Re: Lots of good stuff.....
|
Sat, 20 March 2004 06:58
|
|
It doesn't come with any sensors or plugs, so it needs to be wired up, but that's a very simple job. It's just setup/tuned for a 4AGE.
|
|
|
Location: Adelaide
Registered: May 2003
|
Re: Lots of good stuff.....
|
Sat, 20 March 2004 07:05
|
|
Ah ok, well i still have my stock 100kw loom, with all plugs. I assume that the new loom is long enough for RWD, or will i have to lengthen it?
Also, the loom would be pretty clearly marked, for injectors and stuff like that.
And also i cant find any specs on the MT8, only the LT8. But from memory they are pretty similar. Thats right eh?
Oh yeah, and possible support for a CAS?
|
|
|
Toymods Board Member I supported Toymods
Location: Turramurra, Sydney.
Registered: May 2002
|
Re: Lots of good stuff.....
|
Sat, 20 March 2004 08:20
|
|
It should be lng enough for RWD, I guess it comes down to how far through the firewall you want to mount the computer. My loom only came through about 40cm.
Loom is brand new & yes, well marked.
It's pretty much the same as an LT-8 only it cannot be tuned with a laptop, only the hand controller.
It hooks up the the CAS in the bottom of the standard 16v dizzy, so it might not work with the GZE CAS, but could be adjusted to suit.
|
|
|
I supported Toymods Banned User
Location: Brisbane
Registered: May 2002
|
Re: Lots of good stuff.....
|
Sun, 21 March 2004 05:42
|
|
You have a PM.
|
|
|
Toymods Board Member I supported Toymods
Location: Turramurra, Sydney.
Registered: May 2002
|
|
|
Toymods Board Member I supported Toymods
Location: Turramurra, Sydney.
Registered: May 2002
|
|
|
Location: UNKNOWN
Registered: September 2003
|
Re: Lots of good stuff.....
|
Sun, 21 March 2004 11:44
|
|
You have pm
|
|
|
Location: Sydney
Registered: October 2003
|
Re: Lots of good stuff.....
|
Sun, 21 March 2004 22:47
|
|
sent you a pm.
|
|
|
Location: Redbank Plains,near Ipswi...
Registered: May 2002
|
Re: Lots of good stuff.....
|
Mon, 22 March 2004 00:50
|
|
can you pls post/send me a pic of the sump. what car weas it made 4??.
beware, the Volvo calipers are great, but need a 25mm or larger master cylinder and an adjustable valve fitted to rear to make them work properly.
|
|
|
Toymods Board Member I supported Toymods
Location: Turramurra, Sydney.
Registered: May 2002
|
Re: Lots of good stuff.....
|
Mon, 22 March 2004 15:11
|
|
I'll try to get some pics up tomorrow.
I don't know what it was made for, it came with an engine I bought a while back.
|
|
|
Toymods Board Member I supported Toymods
Location: Turramurra, Sydney.
Registered: May 2002
|
Re: Lots of good stuff.....
|
Mon, 22 March 2004 15:16
|
|
Added:
G/M/JZA-70 Brake Master Cylinder, 25mm bore, direct bolt on replacement to R/TA23 & RA28s.
$50
|
|
|
Toymods Board Member I supported Toymods
Location: Turramurra, Sydney.
Registered: May 2002
|
Re: Lots of good stuff.....
|
Tue, 23 March 2004 15:17
|
|
Things to do tomorrow: take picture of bump, I mean sump.
|
|
|
Location: Brisbane
Registered: February 2003
|
Re: Lots of good stuff.....
|
Wed, 24 March 2004 12:21
|
|
what are the specs of the extractors? (size etc.)
What car did they come off?
|
|
|
Toymods Board Member I supported Toymods
Location: Turramurra, Sydney.
Registered: May 2002
|
|
|
Toymods Board Member I supported Toymods
Location: Turramurra, Sydney.
Registered: May 2002
|
|
|
Toymods Board Member I supported Toymods
Location: Turramurra, Sydney.
Registered: May 2002
|
Re: Lots of good stuff.....
|
Thu, 25 March 2004 10:43
|
|
The extractors have 1 1/4" primaries, 1 1/2" secondaries & goes into 2 1/4" pipe.
They came of my RA23 Celica.
|
|
|
Location: northern beaches
Registered: August 2002
|
Re: Turbo, intercooler, 4 spots, extractors + more
|
Thu, 25 March 2004 10:55
|
|
interested in the exaust, any idea if they will fit in a sprinter? or were they made to suit the celica? also will they fit a 100kw motor?
|
|
|
Toymods Board Member I supported Toymods
Location: Turramurra, Sydney.
Registered: May 2002
|
Re: Turbo, intercooler, 4 spots, extractors + more
|
Thu, 25 March 2004 13:01
|
|
I don't see why they wouldn't fit a sprinter, the bracket hanging off halfway down bolts to one of the bellhousing bolts, to give you some perspective of how close to the motor/box they run.
And yes they would fit a 100kW.
|
|
|
Location: Brisbane
Registered: February 2003
|
Re: Turbo, intercooler, 4 spots, extractors + more
|
Fri, 26 March 2004 05:01
|
|
what about a gze?
|
|
|
Toymods Board Member I supported Toymods
Location: Turramurra, Sydney.
Registered: May 2002
|
Re: Turbo, intercooler, 4 spots, extractors + more
|
Sat, 27 March 2004 05:17
|
|
Yep, GZE too.
|
|
|
Toymods Board Member I supported Toymods
Location: Turramurra, Sydney.
Registered: May 2002
|
Re: Turbo, intercooler, 4 spots, extractors + more
|
Thu, 01 April 2004 03:13
|
|
Bumparino.
|
|
|
Location: sydney
Registered: June 2003
|
Re: Turbo, intercooler, 4 spots, extractors + more
|
Thu, 01 April 2004 07:45
|
|
hy big worm im still waiting on email for cam gears
thanks jess
|
|
|
Location: Camden, NSW
Registered: June 2002
|
Re: Turbo, intercooler, 4 spots, extractors + more
|
Fri, 02 April 2004 05:05
|
|
is it worthwhile upgrading the ma70 cooler to jza70 cooler? Or would the only worth while thing be getting a custom job?
|
|
|
Toymods Board Member I supported Toymods
Location: Turramurra, Sydney.
Registered: May 2002
|
Re: Turbo, intercooler, 4 spots, extractors + more
|
Sat, 03 April 2004 17:35
|
|
Well, here's pics of the cam gears, finally. Sorry I took so long!
NOTE: I'm selling the alloy inserts only, you need to machine out & then drill & tap a set of 100kW cam gears to go with them.
Installed:
And a view of the back, showing the original gear that's been machined out.
|
Attachment: DSC03468.jpg
(Size: 78.32KB, Downloaded 1012 time(s)) |
|
Attachment: DSC03469.jpg
(Size: 71.58KB, Downloaded 1027 time(s)) |
[Updated on: Tue, 06 April 2004 13:08]
|
|
|
Toymods Board Member I supported Toymods
Location: Turramurra, Sydney.
Registered: May 2002
|
|
|
Location: Perth, WA
Registered: June 2002
|
Re: turbo, 'cooler, cam gears, calipers etc
|
Wed, 14 April 2004 05:26
|
|
Hi,
I currently have a T3 turbo on my 2TGEU TA22 Celica. Someone told me to get a GT28 as it would give me much better performance - probably less lag as opposed to more power.
Just curious though. Your GT28 wouldn't bolt on to a T3 exhaust manifold would it?
Do you know if you can get GT28's that can?
Obviously, I could modify manifolds, etc. but I'd prefer not to.
Thanks
Gene
|
|
|
Location: Brisbane
Registered: February 2003
|
Re: Lots of good stuff.....
|
Thu, 15 April 2004 13:54
|
|
sent you PM about the turbo.
ta,
charles.
|
|
|
Location: Newcastle NSW
Registered: June 2002
|
Re: turbo, 'cooler, cam gears, calipers etc
|
Fri, 16 April 2004 01:17
|
|
why are you only selling the cam gear center? you have another use for the outer
|
|
|
Location: Newcastle NSW
Registered: June 2002
|
Re: turbo, 'cooler, cam gears, calipers etc
|
Fri, 16 April 2004 01:39
|
|
why are you only selling the cam gear center? you have another use for the outer
|
|
|