Author | Topic |
Location: Sydney
Registered: April 2004
|
Springs for a MR2 (SW20)
|
Tue, 20 April 2004 23:42
|
|
I am very close to buying some lowered springs for my MR2...
car will have 18 inch on it...and i want it lowered to the tyres..
Question is what springs (brand) should i get?? i want a comfy ride aswell and trying to avoid the harsh ride..
Kings, Pedders, Koni, H&R, Jumbos, Kmac...etc.etc.
any suggestions would be great???
|
|
|
Location: Parramatta
Registered: July 2002
|
Re: Springs for a MR2 (SW20)
|
Wed, 21 April 2004 00:00
|
|
talk to white line...
also it depends on what u want from the car look or handling???
18s canmt go to low u will scrub out at the front alot... no more then 2 inches all round other wise it will scrub alot... however if u go 2 inches or lower the ride will be rough the only way of over comming this is rase it or cut the bump stops in half...which there is nothing wrong with as far as im concirned...
As i said go to whiteline i belive they do the best springs and i know they know there stuff when it comes to suspension, they are also honest
|
|
|
Location: Sydney
Registered: April 2004
|
Re: Springs for a MR2 (SW20)
|
Wed, 21 April 2004 00:10
|
|
thanks again MR2...
question is i knwo that one company i listed in my original post do cut the bump stops in half...and this is Illegal...
would Whiteline do the same and cut the bump stops?? i have heard good things about them too.
what im looking for is i guess in the middle...not too soft and bouncy and not too hard and rough...
|
|
|
Location: Parramatta
Registered: July 2002
|
Re: Springs for a MR2 (SW20)
|
Wed, 21 April 2004 02:38
|
|
nope they wont cut the bump stops but im sure they have new ones to suit, that will serve your purpose.
|
|
|