| Author | Topic |
|---|
Location:
melbourne
Registered:
November 2003
|
|
how fast can u go?
|
Wed, 10 March 2004 05:26
|
 |
G'day guys, i was just wonderin what kinda speeds u guys can hit in 1st, 2nd, and 3rd gears???
only had my P's for like a week, so havent had time to experiment much? in 2nd gear ive hit 100kmh with 4 people in car, on a slight hill.
the only thing ive put to shame so far is a 1996 1.5 daewoo ciello, hahahaha. my ride is completely stock (engine wise).
|
|
|
I supported Toymods
Location:
Epping, Sydney
Registered:
May 2002
|
|
Re: how fast can u go?
|
Wed, 10 March 2004 05:30
|
|
1st - 55
2nd - 90-95 (need new diff ratio to get that 0-100 time down to 1 change)
dont know the rest, but 5th can dish out more than 220km/hr
|
|
|
Location:
Adelaide
Registered:
June 2003
|
|
Re: how fast can u go?
|
Wed, 10 March 2004 06:00
|
|
in my rx7
1st- about 45
2nd about 80
3rd about 140
4th just over 180
5th ? duno my speedo runs out at 180
dads v8 fairlane on the other hand can do 100 in 1st
|
|
|
Location:
melbourne
Registered:
November 2003
|
|
Re: how fast can u go?
|
Thu, 11 March 2004 05:38
|
|
|
lol did i mention im driving a corolla seca CS 1985 1.6l carby, 4AC? reved it out to 6000rpm when i did that 100kms in 2nd with the 4 people in the car. personally i rekon it was only 90km/hr, but my mate sitting behind me swore it was 100km/hr.
|
|
|
Location:
UK at moment
Registered:
May 2003
|
|
Re: how fast can u go?
|
Thu, 11 March 2004 16:58
|
|
A car I used to own ..
(a commodore - they're not all bad!!)
.. 4 speed gearbox with 3.08:1 borg warner diff.. (6 cyl motor)
15" wheels with 60 series profile tyres ( i think )
almost 70 k's in first (at 8500 rpm)
just under 140 k's in second (8500 rpm)
got over 190 in third a couple of times (was not watching tacho by this point)
and don't know what it was in 4th as the speedo was well and truly over by this stage! .. but around 220, hmm..
It could go from 70 (in second) to almost 140 (in second still) soo so quickly.
|
|
|
Location:
UK at moment
Registered:
May 2003
|
|
Re: how fast can u go?
|
Thu, 11 March 2004 17:00
|
|
just remembered ..
2001 model Yahama r1 - 0-96kms an hour IN FIRST!
|
|
|
Location:
Sydney
Registered:
June 2003
|
|
Re: how fast can u go?
|
Fri, 12 March 2004 03:31
|
|
| carsanactra wrote on Thu, 11 March 2004 16:38 |
lol did i mention im driving a corolla seca CS 1985 1.6l carby, 4AC? reved it out to 6000rpm when i did that 100kms in 2nd with the 4 people in the car. personally i rekon it was only 90km/hr, but my mate sitting behind me swore it was 100km/hr.
|
I think you would be lucky to hit 90 in a 4AC in second, i can get between 90 and 100 in second in my AE82 hatch bigport (which came from an 86 twin cam version of your car). Though i havent had the engine tuned since its put in i dont think it will make that much a difference. I know with 4 people in the car i wouldnt be able to get that much.
|
|
|
Location:
Sunshine Coast
Registered:
February 2004
|
|
Re: how fast can u go?
|
Fri, 12 March 2004 04:58
|
|
1st=45-50ish
2nd=90ish
3rd=140ish
4th=180
5th=*shrug*
stupid speedos
|
|
|
I supported Toymods
On probation
Location:
Brisbane, Queensland
Registered:
January 2003
|
|
Re: how fast can u go?
|
Fri, 12 March 2004 09:46
|
|
|
I'm pretty sure i can get to at least 70 with my old 2T shitter, i'll put up my results when i get my car back with the 3TGTE!
|
|
|
Location:
Melbourne
Registered:
October 2003
|
|
Re: how fast can u go?
|
Fri, 12 March 2004 09:50
|
|
mines easy to read
1st: 40
2nd: 80
3rd: 120
4th: 160
(40km/h per gear)
Haven't gone any further and by this result I would take a guess that 200km/h will be see me a rev limiter in 5th gear.
|
|
|
Location:
newcaslte
Registered:
March 2004
|
 Re: how fast can u go?
|
Fri, 12 March 2004 11:07
|
|
dads swift does
1st - 50km/h
2nd - 85ish
3rd - 130km/h
i think that is damn fine cause it isnt a GTI or even a 4 cylinder. it is the GA 990cc 3 cylinder sick car hail damage as well 
|
|
|
Location:
Sunshine Coast
Registered:
February 2004
|
|
Re: how fast can u go?
|
Fri, 12 March 2004 11:09
|
|
| rejected wrote on Fri, 12 March 2004 21:07 |
sick car hail damage as well
|
dont you mean speed dimples?
|
|
|
I supported Toymods
On probation
Location:
Brisbane, Queensland
Registered:
January 2003
|
|
Re: how fast can u go?
|
Fri, 12 March 2004 13:05
|
|
|
someday i have to go for a drive in a 3 cylinder
|
|
|
Location:
Sunshine Coast
Registered:
February 2004
|
|
Re: how fast can u go?
|
Fri, 12 March 2004 13:08
|
|
| boris wrote on Fri, 12 March 2004 23:05 |
someday i have to go for a drive in a 3 cylinder
|
done it
evil car 
|
|
|
Location:
Brisbane, QLD, Australia
Registered:
May 2002
|
|
Re: how fast can u go?
|
Fri, 12 March 2004 13:14
|
|
Ok lets see....
1st: ~60
2nd: ~125
3rd/4th: dunno, but I'd say either speed and/or rev limiter. I havn't had any desire to test the upper limits of my car above 160 yet.
|
|
|
Location:
melbourne
Registered:
November 2003
|
|
Re: how fast can u go?
|
Fri, 12 March 2004 14:48
|
|
yeah, i was full stoked i got anywhere near 90 honestly. couldnt believe it either. must have been a really good cold night or something. i know i can hit 80kmhr without to much stress in second, but i get worried if i push it anymore than that in second!!! that was a once off for sure!!!
GO THE 4AC!!!!
i wana hear from someone who has a 20v 4age in an ae82!!! would be great!!!
byt the way, is the twincam AE82 really that much quicker than my shitty ol 4AC?? 4AC = 57kw, 4age = 88kw, cause im considering switching to a 4age twincam, or doing an engine swap for a 100kw 4AGE into my rolla, or even the 20v if money permits itself.
|
|
|
Location:
Sydney
Registered:
June 2003
|
|
Re: how fast can u go?
|
Sat, 13 March 2004 06:47
|
|
|
The difference is huge, but then again my 4AC was a pos. Now i have the instant acceleration and acceleration in higher speeds that the 4ac didnt have.
|
|
|
Location:
newcaslte
Registered:
March 2004
|
|
Re: how fast can u go?
|
Sat, 13 March 2004 06:58
|
|
yeah electronicaly placed dimples for extra speed.
seen a bit of hail eh? Have you heard why they put dimples in golf balls? They go faster i told that to some guy in a lancrusier and he got real pissed off hahah 
|
|
|
Location:
melbourne
Registered:
November 2003
|
|
Re: how fast can u go?
|
Sat, 13 March 2004 09:06
|
|
ey grinder, what exactly do u mean the difference is huge???
huge for what?
the 20valve, the 100kw, or the 86kw?
PLEASE EXPLAIN!
|
|
|
Location:
Sydney
Registered:
June 2003
|
|
Re: how fast can u go?
|
Sat, 13 March 2004 13:43
|
|
|
86kw is all i ha ve and im ever so grateful i made the change.
|
|
|
Location:
Gauteng, South Africa
Registered:
March 2004
|
|
|
Location:
Sydney
Registered:
June 2003
|
|
Re: how fast can u go?
|
Mon, 15 March 2004 06:30
|
|
I dont know 5th, but 1st is about 50-60 (dont really have time to look at speedo in 1st or second).
2nd is about 100
3rd is about 150 or so
4th is about 190 or so.
|
|
|
Location:
Melbourne
Registered:
February 2003
|
|
Re: how fast can u go?
|
Mon, 15 March 2004 09:32
|
|
|
Guys, I haven't a clue about speeds in anything but top, but last week I drove my 1JZ powered car to 204 MPH (326K) at the DLRA Speedweek in South Aus. This was at 7600 RPM, for 3 and a half miles at this speed, plus 2 miles wind up. We ran this about 8 times, and probably ran 190 MPH about 12 times before we remembered to turn the rev limeter off. The motor is a $440 second hand one from EKW, with 440cc injectors and a TO4. It runs two Soarer intercoolers welded together. By the way, this is a class record, and I believe the fastest 6 cylinder in the land.
|
|
|
Location:
Ballarat, Victoria
Registered:
March 2003
|
|
Re: how fast can u go?
|
Mon, 15 March 2004 10:13
|
|
all just before or on the redline:
1st: 55
2nd: 83 or so
3rd: about 120? 130? im not watching at this stage
4th: dunno really
5th: again, who knows
thats with the 5me, yeah baby 
|
|
|
Location:
melbourne
Registered:
November 2003
|
|
Re: how fast can u go?
|
Mon, 15 March 2004 13:55
|
|
|
GUYS!!! not every1 knows what car u drive, so dont forget to put that in too!!! as well as any mods u may have done! cheers..
|
|
|
Location:
Perth, W.A
Registered:
October 2003
|
|
Re: how fast can u go?
|
Tue, 16 March 2004 01:12
|
|
My old N14 SSS
60km/h in 1st
100km/h 2nd
140 3rd
178/180 4th
215 and still going (albeit slowly) 5th
|
|
|
Location:
Sydney
Registered:
June 2003
|
|
Re: how fast can u go?
|
Tue, 16 March 2004 01:14
|
|
Um, sorry.
I drive a MkIII with a 7mgte. Not really any mods. cat back exhaust, 500hp fuel pump. Thats it really.
|
|
|
Location:
Epping, Sydney
Registered:
April 2003
|
|
Re: how fast can u go?
|
Tue, 16 March 2004 01:31
|
|
| Quote: |
Guys, I haven't a clue about speeds in anything but top, but last week I drove my 1JZ powered car to 204 MPH (326K) at the DLRA Speedweek in South Aus. This was at 7600 RPM, for 3 and a half miles at this speed, plus 2 miles wind up. We ran this about 8 times, and probably ran 190 MPH about 12 times before we remembered to turn the rev limeter off. The motor is a $440 second hand one from EKW, with 440cc injectors and a TO4. It runs two Soarer intercoolers welded together. By the way, this is a class record, and I believe the fastest 6 cylinder in the land.
|
you win
I haven't really ever stretched my celica right out but I am sure 200 is no drama for it pending limitor of course 
|
|
|
Location:
Northwestern Sydney
Registered:
August 2002
|
|
|
Location:
Canberra
Registered:
February 2004
|
|
|
Location:
newcaslte
Registered:
March 2004
|
|
Re: how fast can u go?
|
Tue, 16 March 2004 06:56
|
|
ummmm shot gun not being in that car. 170km/h with out a wheel alignment crikey.  fastest ive been was 170km/h on a zz-r 600 with my dad riding that was heaps fun 
|
|
|
Location:
NSW, East Coast
Registered:
July 2003
|
|
|
Toymods Club Treasurer
Location:
Sydney
Registered:
May 2002
|
|
Re: how fast can u go?
|
Mon, 22 March 2004 01:59
|
|
Got no idea what my car will do at 5200 redline as after 4000rpm it would take about a year to get there.
1st - 15km/h
2nd - 45km/h
3rd - 110km/h
4th - 140km/h
5th - guessing 185km/h (speedo stops at 180)
Not bad for a turbo diesel!!
140 to 185 takes about 4km!
Also freaks people out why I'm in 3rd gear on the other side of an intersection when I'm pushing it hard.
|
|
|
Location:
sydney
Registered:
July 2003
|
|
Re: how fast can u go?
|
Thu, 01 April 2004 13:30
|
|
|
i heard that The mitsubishi GTO's can reach 100 on first gear
|
|
|
I supported Toymods
Location:
Epping, Sydney
Registered:
May 2002
|
|
|
Location:
UK at moment
Registered:
May 2003
|
|
Re: how fast can u go?
|
Thu, 01 April 2004 15:23
|
|
Doesn't have to be hundreds of thousands of dollars..
My mate had a HR holden with the old two speed powerglide - he got more than 100 in first ! (I know, I know, only one gear left after that, but boy they were looooong gears!)
|
|
|
Location:
Sydney
Registered:
June 2003
|
|
Re: how fast can u go?
|
Fri, 02 April 2004 01:22
|
|
|
ROFL. I couldnt imagine leaving it in first for that long. Imagine travelling along on Epping Rd (80 zone) in first.
|
|
|
Location:
Geelong.Vic.AU
Registered:
September 2003
|
|
Re: how fast can u go?
|
Fri, 02 April 2004 23:41
|
|
|
I can't test mine properly, I dont know where it would be safe to do it. i'll just have to fine a nice long road thats free from cops.
|
|
|
Location:
perth
Registered:
April 2004
|
|
Re: how fast can u go?
|
Sun, 04 April 2004 03:47
|
|
| torque wrote on Fri, 12 March 2004 03:58 |
A car I used to own ..
(a commodore - they're not all bad!!)
.. 4 speed gearbox with 3.08:1 borg warner diff.. (6 cyl motor)
15" wheels with 60 series profile tyres ( i think )
almost 70 k's in first (at 8500 rpm)
just under 140 k's in second (8500 rpm)
got over 190 in third a couple of times (was not watching tacho by this point)
and don't know what it was in 4th as the speedo was well and truly over by this stage! .. but around 220, hmm..
It could go from 70 (in second) to almost 140 (in second still) soo so quickly.
|
wat commodore did u used to own? and mods ! lol
|
|
|
Location:
winmalee
Registered:
December 2003
|
|
Re: how fast can u go?
|
Sun, 04 April 2004 05:00
|
|
AE93 GTi Corolla.
pod filter
extractors to tip.
1st: just before 60km
2nd: 90-100 (100 is bang on valve bounce)
3rd: 140
4th: about 185
5th: 190 plus, that was before i had to slow down. Hey i was on conrod straight 
All said, probably been about 198 or something. i think the extractors are tuned for more low end kick.
|
|
|
Location:
theres a castle on my hil...
Registered:
October 2003
|
|
Re: how fast can u go?
|
Mon, 05 April 2004 10:16
|
|
my old car (85 charade G11 turbo) GO THE 3 BANGERS!
1st - 40
2nd - 75*
3rd - 115*
4th - i didnt look
5th - 165*
*(give or take a few km's)
speedo was probably out coz i had larger profile tyres than standard and a road test from back in the day claimed top speed at 160kmh
not gonna try in my celica yet coz its got an auto box at the moment and i'll wait to test it at a track day once all the works finished.
|
|
|
Location:
toowoomba qld
Registered:
March 2004
|
|
Re: how fast can u go?
|
Mon, 05 April 2004 11:29
|
|
sv21 Camry 3 s-fe 5-spd manual
these aren't top speeds in gear but what I've had my car going at
1st:45km/h
2nd:80km/h
3rd:115km/h
4th:?120km/h is the most I've got in that gear passing an idot driving in a right hand overtaking lane!
5:160km/h (not top speed had to back off started to run out of road very quickly I might add (well more so sharp corner!)
I'll have to take it out for a spin again one day! were theres no bloody corners!  can't wait to see how fast she goes! good ol camry's!
|
|
|
Location:
UK at moment
Registered:
May 2003
|
|
Re: how fast can u go?
|
Mon, 05 April 2004 16:05
|
|
| Grant. wrote on Sun, 04 April 2004 13:47 |
| torque wrote on Fri, 12 March 2004 03:58 |
A car I used to own ..
(a commodore - they're not all bad!!)
.. 4 speed gearbox with 3.08:1 borg warner diff.. (6 cyl motor)
15" wheels with 60 series profile tyres ( i think )
almost 70 k's in first (at 8500 rpm)
just under 140 k's in second (8500 rpm)
got over 190 in third a couple of times (was not watching tacho by this point)
and don't know what it was in 4th as the speedo was well and truly over by this stage! .. but around 220, hmm..
It could go from 70 (in second) to almost 140 (in second still) soo so quickly.
|
wat commodore did u used to own? and mods ! lol
|
VH commodore with 202 - Very worked!
Stage 5 head with port work - 4mm oversize 350 chev stainless valves, triple angle valve seats, roller rockers, 48/80 cam with 275' duration, fully balanced and blueprinted motor, rods shotpeend and polished, some kind of very expensive pistons, 650 holley (matched to cam) - vacuum secondaries, m21 gearbox (5 or 6 of them), deck was blocked and o-ringed, 11:1 compression (yes!) dry sump, etc etc etc etc etc - yes, it had a LOT of work done on it, and went REAL hard. I sold it cause I was too young (at that time), and it got up to stupid speed so quickly! Went even harder with triple webbers on it, but it was just to much to tune (so that it would stop spitting fuel out the exhaust) ..
|
|
|
Location:
Brisbane
Registered:
July 2002
|
|
Re: how fast can u go?
|
Thu, 08 April 2004 07:53
|
|
well mine is auto so it doesent count
but
1st-75-80
2nd-140ish
|
|
|
Location:
wollongong NSW
Registered:
August 2003
|
|
Re: how fast can u go?
|
Mon, 19 April 2004 12:25
|
|
ae82 4ac auto. factory recomended 62km/h max for 1st bout what i get
2nd 100km/h really bad when goin along at 100 in third then it kicks back to get up a hill revin tits off
third not sure got up to 150 and it could keep goin
|
|
|
Location:
Sydney
Registered:
December 2003
|
|
Re: how fast can u go?
|
Mon, 19 April 2004 12:46
|
|
The metal is willing, the rubber is weak. Still got retreads (rated to 140) on the rear. Will let you know once the new bridgestones are on. 
Have pulled 170km/h in 5th with a LONG way to go on the tacho.
|
|
|
I supported Toymods
Location:
Sydney
Registered:
April 2004
|
|
Re: how fast can u go?
|
Wed, 21 April 2004 03:07
|
|
|
But in the end, its not how fast your car can go and how long it last's. Many cars can do the 100 in first. If it last's very long afterwards is another subject alltogather. lol.
|
|
|
Location:
UK at moment
Registered:
May 2003
|
|
Re: how fast can u go?
|
Fri, 23 April 2004 08:30
|
|
|
that's why you build it properly!
|
|
|
I supported Toymods
Location:
Sydney
Registered:
April 2004
|
|
Re: how fast can u go?
|
Fri, 23 April 2004 12:13
|
|
My point being, no mater how good you build your moter up it all depends on many things. Example:
I bet you that you can't get the new 5.7L Gen III going quicker and faster and all than the old 308. Point being one is made from cast Iron and the other Alloy, as we all know Iron is stronger. .
Why do you think the OLDER toyota's go so well... i also would say that a corolla built from 1970 - 1980 ( i said 1970 because i dont know b4 then) would outlast a 80 to 2004 model toyota.
Then again why would you spend $3500 grand on a moter than your just going to rev the freegin hell out of. lol. Sounds silly to me. If you had some sense you would know the torque range is 1500 - 3800rpm. After that is more noise than actual go.
All im really saying is that you would of want of done a good job if you want to moter to stand up to it. I.E $300 spark plugs and get the moter blueprinted, stronger nuts/bolts throughout.
Cheers Daniel.
|
|
|
Location:
Perth - Cannington
Registered:
December 2002
|
|
Re: how fast can u go?
|
Sat, 24 April 2004 10:15
|
|
hmmm.. lets see.. my regular ride now is a car called "Impact Black" (1993 Toyota Supra TT) 3L...
and if i remember rightly...
1st - 85kph
2nd - 160kph
3rd - 200kph
4th - 250kph
5th - Fuck knows, its off my scale...
6th - ... yea.. i know this one cause i didnt know 5th right? O.o
i have to admit though, we've never maxxed 6th gear out.
can't get enough road to allow for stopping... i know we can hit it.. its just the stopping bit that wouldnt happen... if i had a clean road along the Causeway, i could max it out.
but anyhow.. thats the full thrash of each gear on that car, scares the shit outta me once i dont know what speed im pulling though.. lol.. no idea how long it will take to stop the car.
and those who know Supras, know they arent light cars, they dont like to be told to stop fast.
Peace
Katsu
|
|
|
Location:
wollongong
Registered:
March 2004
|
|
Re: how fast can u go?
|
Sun, 25 April 2004 09:43
|
|
AE 82 with 20v
1st 65
2nd 110
3rd 150ish
4th 190ish
5th dunno, speedo stops at 200
|
|
|
Location:
On your mum!
Registered:
May 2002
|
|
Re: how fast can u go?
|
Mon, 26 April 2004 09:04
|
|
| torque wrote on Fri, 12 March 2004 03:58 |
A car I used to own ..
(a commodore - they're not all bad!!)
.. 4 speed gearbox with 3.08:1 borg warner diff.. (6 cyl motor)
15" wheels with 60 series profile tyres ( i think )
almost 70 k's in first (at 8500 rpm)
just under 140 k's in second (8500 rpm)
got over 190 in third a couple of times (was not watching tacho by this point)
and don't know what it was in 4th as the speedo was well and truly over by this stage! .. but around 220, hmm..
It could go from 70 (in second) to almost 140 (in second still) soo so quickly.
|
Man 8500 RPM 6 cylinder Commodore - that's impressive to say the very least.
I think that the old Corolla does just over 100 in second - and freaking fast in 4th and 5th (it will 7500 in 4th in an eyeblink). I have seen well in excess of 200 (of course this was at a track).
|
|
|
Location:
On your mum!
Registered:
May 2002
|
|
Re: how fast can u go?
|
Mon, 26 April 2004 09:07
|
|
| torque wrote on Tue, 06 April 2004 02:05 |
| Grant. wrote on Sun, 04 April 2004 13:47 |
| torque wrote on Fri, 12 March 2004 03:58 |
A car I used to own ..
(a commodore - they're not all bad!!)
.. 4 speed gearbox with 3.08:1 borg warner diff.. (6 cyl motor)
15" wheels with 60 series profile tyres ( i think )
almost 70 k's in first (at 8500 rpm)
just under 140 k's in second (8500 rpm)
got over 190 in third a couple of times (was not watching tacho by this point)
and don't know what it was in 4th as the speedo was well and truly over by this stage! .. but around 220, hmm..
It could go from 70 (in second) to almost 140 (in second still) soo so quickly.
|
wat commodore did u used to own? and mods ! lol
|
VH commodore with 202 - Very worked!
Stage 5 head with port work - 4mm oversize 350 chev stainless valves, triple angle valve seats, roller rockers, 48/80 cam with 275' duration, fully balanced and blueprinted motor, rods shotpeend and polished, some kind of very expensive pistons, 650 holley (matched to cam) - vacuum secondaries, m21 gearbox (5 or 6 of them), deck was blocked and o-ringed, 11:1 compression (yes!) dry sump, etc etc etc etc etc - yes, it had a LOT of work done on it, and went REAL hard. I sold it cause I was too young (at that time), and it got up to stupid speed so quickly! Went even harder with triple webbers on it, but it was just to much to tune (so that it would stop spitting fuel out the exhaust) ..
|
I am not trying to dispute this claim - 48/80 cam = 308 deg duration not 275.
|
|
|
Location:
Canberra
Registered:
August 2003
|
|
Re: how fast can u go?
|
Tue, 27 April 2004 06:43
|
|
I don't speed, that'd be illegal!!!
But I have seen the better side of 200 on a private road!
|
|
|
Location:
Adelaide
Registered:
April 2004
|
|
Re: how fast can u go?
|
Tue, 27 April 2004 09:13
|
|
in my old car (VP Commie)
100 outa 1st, don't remember what i got outa second third or 4th, speedo stops at 220 and it made that a few times.
|
|
|
Location:
UK at moment
Registered:
May 2003
|
|
Re: how fast can u go?
|
Tue, 27 April 2004 15:59
|
|
Yello rolla -
Seems I'm a bit rusty, although I didn't think it was 308 degrees - It was an Ivan Tige custom cam.. It was damn lumpy, I can tell you that.. and yes, no-one believed me how it went till I took them for a ride in it! 
It was a serious motor, built by someone that really knew their stuff! Apparently (and I can believe this) the motor was in an LC torana with triple carbs and ran into the 12's..
And whoever said it is just noise above 3800 - you need a ride in a high revving car! (ie: you can feel the power increasing, the cam had only just started working by that stage!) ..
|
|
|
Location:
Sydney
Registered:
January 2004
|
|
|
Location:
Sydney
Registered:
January 2004
|
|
|
Location:
Cabramatta, Sydney
Registered:
April 2004
|
|
Re: how fast can u go?
|
Fri, 30 April 2004 13:04
|
|
03 camry sportivo 2.4 auto
1st 60kph
2nd 105-110kph
3000-3500rpm at 170kph
|
|
|
Location:
Perth
Registered:
October 2003
|
|
Re: how fast can u go?
|
Fri, 30 April 2004 13:47
|
|
86 Supra 1jz-gte manual conversion
SPEEDING IS BAD MMMKKKK
1st-55
2nd-105
3rd-170
4th-not sure
5th-235
i dont have a working tacho so the first 3 gears are limiter speeeds and fifth is my personal limiter speed, i dont like standard mk3 brakes
|
|
|
