Toymods Car Club Inc: Tech & Conversions => Clutch Slave q's

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » Clutch Slave q's Show: Today's Posts :: Show Polls Email to friend

Author

Topic

STR8 2.8
Forums Junkie

Location:
Sydney
Registered:
February 2003

Clutch Slave q's	Thu, 22 April 2004 06:32

When i pinch the boot on the clutch slave arm it squirts dirty clutch fluid out. This is bad, yes? Should the little arm pushing the fork be on a weird angle. It doesn't exactly sit parallel to the body of the cylinder. It sort of sticks out at an angle to hit the hole in the fork. Is this ok? This is on an ma61 with what could be a w57... [Report message to a moderator]

bbaacchhyy
Forums Junkie

Location:
Adelaide
Registered:
September 2003

Re: Clutch Slave q's	Thu, 22 April 2004 07:22

Yes. No. Arm should be straight. Could either be that it is not sitting in the slave cyl properly, or there is the problem with the clutch fork itslef. A rebuild kit for the slave cyl cost me $12.00 from the local brake place. A bit of 1200 W&D, some metho, and easy as pie. Cheers Michael B [Report message to a moderator]

HighRolla
Forums Junkie

Location:
Sydney
Registered:
January 2004

Re: Clutch Slave q's	Thu, 22 April 2004 07:30

Or a new slave should be around $30 if your lazier [Report message to a moderator]

STR8 2.8
Forums Junkie

Location:
Sydney
Registered:
February 2003

Re: Clutch Slave q's	Thu, 22 April 2004 13:52

cheers, fellas [Report message to a moderator]

Previous Topic:	Autometer Shift Light - Tach wire? my birthday pressie is confusing me :D
Next Topic:	1JZ-GTE Missing Erratically

Current Time: Sun Jun 2 15:29:20 UTC 2024

Total time taken to generate the page: 0.0037250518798828 seconds

.:: Contact :: Home ::.