| Author | Topic |
|---|
Location:
Melbourne
Registered:
May 2002
|
|
R200 LSD
|
Thu, 22 April 2004 07:24
|
 |
I know its not a Toyota part, but would be good for that high powered conversion. There are heaps of cars around that run under 10 seconds with these babies in them, so its worth a look. I have a couple out of r31 skylines, which means they can be fitted to Z's and 1600's, unlike the R200's that are found in things like r33's and z32's. Anyway they are the mechanical variety, good condition.
Any interest?
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: R200 LSD
|
Thu, 22 April 2004 09:06
|
|
|
do 2oosx's have r200's???
|
|
|
Location:
Burwood VIC
Registered:
March 2004
|
|
Re: R200 LSD
|
Thu, 22 April 2004 09:23
|
|
|
What ratio, how much $, in Melbourne? Are they R200 out of Imported Independant Suspesion Rear end or are they out of Aussie Skyline with Borg Warner Live axle?
|
|
|
Location:
Newcastle
Registered:
May 2002
|
|
Re: R200 LSD
|
Thu, 22 April 2004 21:06
|
|
i am also interested in price and ratio,
as well as the overall width from mounting face to mounting face.
if it is skyline the stud pattern should be 4x114.3 is that right?
does it come with brakes? what set up are they?
Cheers
Stew
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: R200 LSD
|
Thu, 22 April 2004 22:45
|
|
r200 should be an independant center out of a s14 nissan or similar. has a single way lsd.
will not fit into a b/w diff without lots of mods - as one is aussie, the other jap nissan
what ratios you got? i have a 4.1, looking for a 3.5 or 3.7
T
|
|
|
Location:
Melbourne
Registered:
September 2002
|
|
Re: R200 LSD
|
Fri, 23 April 2004 00:56
|
|
A lot of the factory LSDs in silvias etc are the viscous type, so you want make sure it is a mechanical type if thats what you're after.
Also may be interested if you let us know what ratio it is.
|
|
|
Location:
Terrigal
Registered:
May 2002
|
|
Re: R200 LSD
|
Sat, 24 April 2004 12:00
|
|
|
I am interested in the R200 LSDs from the R31s that you have. I believe its a direct bolt-in mod for the 280ZX and other Z's. How much do you want for one? Email me at rb20zxt280@hotmail.com
|
|
|
