Author | Topic |
Location: Perth
Registered: June 2002
|
Custom Hubs
|
Mon, 26 April 2004 12:37
|
|
Hi all,
I am considering getting some custom hubs made for my brake conversion. While I have a guy who will happily modify some crown hubs for me, I just wanted to entertain the idea of custom ones.
What material is best suited suited and what approximate costs should I expect if I do all the dirty work like draw them up on CAD etc.
Any help or info on this topic muchly appreciated
Cheers
Gabe
|
|
|
I supported Toymods Banned User
Location: Brisbane
Registered: May 2002
|
Re: Custom Hubs
|
Mon, 26 April 2004 12:39
|
|
7077 alloy? I'm not sure if thats the right number, but I think thats what mine were made out of.
|
|
|
Location: Perth
Registered: June 2002
|
Re: Custom Hubs
|
Mon, 26 April 2004 12:42
|
|
ahh ok so ally is ok......I was thinking they had to be steel, but then again caliper brackets can be ally also.........
7000 series aluminium must be stronger or something
|
|
|
Location: Lost in the K hole
Registered: May 2002
|
Re: Custom Hubs
|
Mon, 26 April 2004 12:44
|
|
7075 to be exact...
and yes, it could be described as stonger
*fucking ridiculously hard* is possible more accurate though
|
|
|
Location: Perth
Registered: June 2002
|
Re: Custom Hubs
|
Mon, 26 April 2004 12:53
|
|
Ok brilliant........So Shane how much were yours to make??
Did you do all the ground work like design etc first, or did you just say here do this??
|
|
|
I supported Toymods Banned User
Location: Brisbane
Registered: May 2002
|
Re: Custom Hubs
|
Mon, 26 April 2004 12:56
|
|
I cant remember what they cost me but I do remember that the material cost more than the labour.
I didnt do any drawings or anything, I just took the old hubs and said I want the stud pattern different and I want the offset different.
|
|
|
Location: Burlington, On. Canada
Registered: January 2004
|
Re: Custom Hubs
|
Mon, 26 April 2004 22:05
|
|
It might be easier to find hubs used on another car that will fit yours.
Case in point is Nissan Z31 hubs (4 bolt and 5 bolt versions) will fit a MA61 spindle.
I used Z31 turbo hubs 5 bolt ('84 to '87), Z32 4 piston calipers and PT Cruiser disc. All on a MA61 strut. Bigger brakes and 5 bolt at a cheap price.
|
|
|
Location: brisbane
Registered: March 2003
|
Re: Custom Hubs
|
Tue, 27 April 2004 10:03
|
|
with the rotor setup going onto your hub just track some wheel bearings down that will suit
|
|
|
Banned by his request
Location: moved to tamworth
Registered: July 2002
|
Re: Custom Hubs
|
Tue, 27 April 2004 10:40
|
|
gabe what of offset? i have a few wilwood undrilled alloy ones that are 2inch offset.
mick
|
|
|
Location: Perth
Registered: June 2002
|
Re: Custom Hubs
|
Tue, 27 April 2004 10:43
|
|
Mick,
I am in the process of having a play with my struts as we speak. I will get back to you over the next couple of days.
When you say undrilled you mean I can choose a pcd?
Gabe
|
|
|
Banned by his request
Location: moved to tamworth
Registered: July 2002
|
Re: Custom Hubs
|
Wed, 28 April 2004 08:21
|
|
yes can pick any pcd you like makes life easy!
mick
|
|
|