| Author | Topic |
|---|
Location:
newcastle nsw
Registered:
May 2002
|
|
injecters for sale
|
Wed, 28 April 2004 00:39
|
 |
6 7mgte injecters
6 1ggte injecters
make an offer
|
|
|
Location:
Rocklea qld
Registered:
February 2003
|
|
Re: injecters for sale
|
Wed, 28 April 2004 10:27
|
|
|
$100 for 7mgte injecters so long as they are good.
|
|
|
Location:
newcastle nsw
Registered:
May 2002
|
|
|
I supported Toymods
Location:
Plumpton/sydney
Registered:
November 2003
|
|
Re: injecters for sale
|
Mon, 03 May 2004 12:30
|
|
ill give you $101 for the 7m injectors LOL
Nah ill say $150
|
|
|
Location:
Newcastle
Registered:
May 2002
|
|
Re: injecters for sale
|
Mon, 03 May 2004 22:40
|
|
heya guys....
7mgte injectors normally go for around $300....
plus these ones have been cleaned and serviced.
Cheers
Stew
|
|
|
Registered:
May 2002
|
|
Re: injecters for sale
|
Tue, 04 May 2004 22:06
|
|
|
Not plannign to steal the thread, but i had a set 7MGTE injectors cleaned and flow tested and they flowed at 486cc from memory. Toyota 'just' rate them as 440cc! Maybe they test it with a higher density fluid like Bosch do, who knows...
|
|
|
Location:
newcastle nsw
Registered:
May 2002
|
|
Re: injecters for sale
|
Wed, 05 May 2004 05:31
|
|
ok asking price is $250 for the 7m injecters, they also come with the plugs. i paid $300 for these, then had them cleaned and serviced, they were for my car but i opted to go for the bigger 13bt injecters, as i went for a fair bit of overkill on my fuel system.
they do fit straight in the standard 1g fuel rail.
ask any local impoters and you wont get them for under $50 an injecter garanteed.
as for the 1g injecters, not too sure what there worth so make an offer
|
|
|
Registered:
December 2003
|
|
Re: injecters for sale
|
Wed, 05 May 2004 08:25
|
|
|
It depends what fuel pressure you run to how much the injector flows Toyota rate then at 440cc at 2.55kg cm2 ..
|
|
|
Location:
newcastle nsw
Registered:
May 2002
|
|
Re: injecters for sale
|
Sat, 08 May 2004 10:45
|
|
bump 
|
|
|
I supported Toymods
Location:
Plumpton/sydney
Registered:
November 2003
|
|
Re: injecters for sale
|
Sat, 08 May 2004 11:26
|
|
Steve
did you have any problems fitting the 13bt injectors into your fuel rail?
Cheers
BEN
|
|
|
Location:
newcastle nsw
Registered:
May 2002
|
|
Re: injecters for sale
|
Mon, 10 May 2004 00:25
|
|
|
no problem, straight swap, there are a couple of different types of 13bt injectors thou, so im told.
|
|
|
Location:
Toowoomba
Registered:
May 2002
|
|
Re: injecters for sale
|
Wed, 12 May 2004 10:12
|
|
|
what are the 1g units rated at?
|
|
|
Location:
newcastle nsw
Registered:
May 2002
|
|
Re: injecters for sale
|
Wed, 12 May 2004 10:17
|
|
|
they are rated at about 240cc i think, or around that, someone got a definate rating?
|
|
|
I supported Toymods
Location:
Plumpton/sydney
Registered:
November 2003
|
|
Re: injecters for sale
|
Wed, 12 May 2004 10:59
|
|
|
245cc for the 1g's
|
|
|
