Author | Topic |
Location: Perth, WA
Registered: February 2003
|
Connecting up 100kw intake to GZE?? PICS INC
|
Fri, 21 May 2004 07:34
|
|
OK i have pulled off the gze intake and bolted on a small port 100kw intake as im going TURBO.
Now im using the origianal Loom from the halfcut and GZE computer (MAP) and ther are a few devices that i dont know if i need them OR where they go.
i have take some pictures of them and can someone help me out to where they get connected too. (or if i need them)
One other thing is where would i find the fuel pump relay?
its all taken from a ae92 4agze Map halfcut if thats any help
Thanks.
http://www.picturetrail.com/gallery/view?p=999& ;gid=4346689&uid=2225281
|
|
|
Banned by his request
Location: moved to tamworth
Registered: July 2002
|
Re: Connecting up 100kw intake to GZE?? PICS INC
|
Fri, 21 May 2004 10:12
|
|
relay is in the bottom of the middle console i.e were the stereo and aircon or air controls are. if you get someone to turn the ignition on while you sit in passange seat with ear close to middle console you will hear it click when they turn the ignition and the pump primes.
mick
p.s make sure you use a blow off valve . and you will have a ruff idle.
|
|
|
Location: Perth, WA
Registered: February 2003
|
Re: Connecting up 100kw intake to GZE?? PICS INC
|
Fri, 21 May 2004 12:41
|
|
Why do i need a BOV?
how would one effect the idel?
|
|
|
Location: Perth, WA
Registered: February 2003
|
|
|
Location: Adelaide
Registered: May 2003
|
Re: Connecting up 100kw intake to GZE?? PICS INC
|
Fri, 21 May 2004 13:54
|
|
Actually the relay which you can hear click next to the ECU is the general systems control relay, cant remember the specific name at,.
The AE92 GZEs actually have a seperate fuel pump relay in the engine bay. Just forward of the passenger location, above the aircon piping. Thats where mine sits, and sat in the frontcut. Then again im not using it, its there for decoration.
As for the BOV, its so you dont get compressor feedback on gear changes.
|
|
|
Location: Perth, WA
Registered: February 2003
|
Re: Connecting up 100kw intake to GZE?? PICS INC
|
Tue, 25 May 2004 00:29
|
|
So does anyone know where i would find the wire to connect to the fuel pump? is it in the loom that goes down the middle of the car (to the rear) ??????
thanks
|
|
|
Location: Adelaide
Registered: May 2003
|
Re: Connecting up 100kw intake to GZE?? PICS INC
|
Tue, 25 May 2004 01:56
|
|
On my SX it was a blue w black stripe going down the passenger side.
|
|
|
Location: Perth, WA
Registered: February 2003
|
Re: Connecting up 100kw intake to GZE?? PICS INC
|
Tue, 25 May 2004 02:16
|
|
Do u know if the fuel gauge sender wires where also in the passenger side loom?
|
|
|
Location: Perth, WA
Registered: February 2003
|
Re: Connecting up 100kw intake to GZE?? PICS INC
|
Tue, 25 May 2004 12:05
|
|
ok i have worked out the fuel pump but still having troble with the Vacume components.. does anyone have close up pics of ther 4agte with stock computer?? or tell me what i need and dont.
thanks guys
|
|
|
Location: Perth, WA
Registered: February 2003
|
|
|
Location: Brisbane
Registered: August 2003
|
Re: Connecting up 100kw intake to GZE?? PICS INC
|
Wed, 26 May 2004 08:34
|
|
That's blue-black.
|
|
|