| Author | Topic |
|---|
Location:
Adelaide
Registered:
April 2003
|
|
Wires through the firewall (ae92)
|
Sat, 22 May 2004 14:26
|
 |
Just out of curiousity those of you have have installed alarms or amps etc. where abouts did you thread your wires through the firewall? More specifically on an ae92?
Pics would be great!
Thanks in advance
|
|
|
Location:
Sydney
Registered:
November 2003
|
|
Re: Wires through the firewall (ae92)
|
Sun, 23 May 2004 04:37
|
|
|
Stick your head in and have a look mate, there are holes everywhere for wires.
|
|
|
Location:
Adelaide
Registered:
April 2003
|
|
Re: Wires through the firewall (ae92)
|
Sun, 23 May 2004 09:07
|
|
| midnight wrote on Sun, 23 May 2004 14:07 |
Stick your head in and have a look mate, there are holes everywhere for wires.
|
I wouldn't say everywhere... Theres are grommets for the speedo cable, heater tap cable, loom going to the injectors...
Just wondering if there was an easier way.
|
|
|
Location:
sydney
Registered:
March 2004
|
|
Re: Wires through the firewall (ae92)
|
Sun, 23 May 2004 13:26
|
|
|
just poke a hole thru those existing grommets and put the wire thru it
|
|
|
Location:
Burlington, On. Canada
Registered:
January 2004
|
|
Re: Wires through the firewall (ae92)
|
Mon, 24 May 2004 03:52
|
|
|
The best and safest place on any car is going through the hole that used by the hood release cable. The hole is usually very large and a small slit in the rubber boot of the gromet that surrounds the cable is easy to make and pss things through.
|
|
|
