| Author | Topic |
|---|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
plugs to use in 2tg/3tc hyrbid
|
Thu, 03 June 2004 09:48
|
 |
what plugs are right for this engine?
3tc plugs?
2tg plugs?
3tgte plugs?
or other ones?
|
|
|
Location:
On your mum!
Registered:
May 2002
|
|
Re: plugs to use in 2tg/3tc hyrbid
|
Thu, 03 June 2004 15:23
|
|
|
I would use 2TG plug (if going by the book), otherwise start with NGK BPR5EY.
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
|
Location:
On your mum!
Registered:
May 2002
|
|
Re: plugs to use in 2tg/3tc hyrbid
|
Fri, 04 June 2004 13:54
|
|
They will do. BP6ES is a slightly colder plug and is probably more suited to wide open and high RPM use (I use BP7ES to BP9ES for my turbo application).
The P stand for projected nose - I believe that these are necessary for the 2TG, 3TG and 18RG.
The number = the heat range (with NGK the colder the plug, the higher the number)
An "R" after the heat range number denotes that is a resistance type plug.
S = normal electrode
Y = electrode has a vee cut in it (for apparently improved flame propagation)
Play with the different plugs until you find one that suits you.
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
Re: plugs to use in 2tg/3tc hyrbid
|
Sat, 05 June 2004 04:57
|
|
|
thanks ALOT for that buddy
|
|
|
Location:
Seattle area, USA
Registered:
June 2002
|
|
Re: plugs to use in 2tg/3tc hyrbid
|
Sat, 19 June 2004 02:45
|
|
NGK BPR6ES is what is in my Toyota T series engine manual.
you could "index" the plugs to. Aim the Eletrode opening towards the front of the engine on all 4 cyls. this will help at uppers revs as the spark is exposed to the A/F mixture better. hth.
|
|
|
