I have a 86 4runner and am eventually putting the 1ggze in it that I have sitting in my shed
I kind of need some help, I have the 1g flywheel and was going to have it redrilled and run a full 4runner h/d clutch set up and I have the correct bell housing to bolt up to my gearbox.
Is this the way to do it ???
I didnt get the ecu with the engine, so I either need to get hold of a standard ecu and loom or buy a s/h or new one. what is the better way to do this and what do I use.
my measurements say that if I use the 3/4y engine mounts on the 1g they will be 20 mm out, is there any engine mounts available "off the shelf" that will fit and bolt up to my chassis and the 1g.
What size radiator am I going to need to keep my cool. I will be running the aircon(if I can get it all to fit back in or I will move the aircon radiator and put its own fan on it)
Is there any other things i need to know, or advice etc, please drop me a message or reply
Sat, 12 June 2004 01:20
