FOR SALE

Brakes and wheels from 1997 RZ-S, 37000kms.

2 x 2 piston front calipers with "supra" logo,Race brake db1234 Comp 2 pads.$200

2 x 296mm standard rotors, machined once.$80
Rotor dimensions
LEFT = 31.4mm(new = 32mm, min = 28mm)
RIGHT = 31.5mm(new = 32mm, min = 28mm)
So there is quite a bit left on these, more than what i though anyway.

2 x 8 x 16(offset 50mm) standard wheels(FALKEN FK451,75% tread)
2 x 9 x 16 (offset 50mm) standard wheels(FALKEN Ze502,75% tread)
60mm centre hole,114.8pcd,5 hole.
$480
It's all gotta go!

ALL AVAILABLE NOW

	Attachment: 16 wheels 2.jpg (Size: 99.46KB, Downloaded 514 time(s))
	Attachment: 16 wheels.jpg (Size: 72.53KB, Downloaded 515 time(s))
	Attachment: Img_0661.jpg (Size: 63.30KB, Downloaded 408 time(s))

[Updated on: Fri, 09 July 2004 07:34]

[Updated on: Thu, 08 July 2004 07:59]

One comment I would like to add to this wheel sticky deals with the MKIV 17" wheels. I bought a set shortly after buying my MKIII. I was pleased with the overall look but very displeased with the front offset. I run 245/40's on the front and have rubbing issues at full lock. Also, I personally think they high offset makes them look funny because they sit in so far. I chose to rectify this by purchasing a set of 15mm offset spacers from H&R. This solution worked out very nicely and the wheels sit as 35mm wheel now. They fill in the fender gap and dont look funny at all anymore. I have no rubbing issues anymore at full lock and none under hard compression. I am running H&R springs so I do have a pretty agressive drop. Also, my car wanders a lot less than it used to. I didnt think an offset change would affect suspension geometry that much, but who knows. At any rate, if you buy MKIV wheels, I would suggest at some point to try this mod. If you are weary, go to Pep Boys and buy a cheap set of front spacers to try and see how you like the look. You wont be disappointed, trust me. I personally really like the MKIV wheel look on the MKIII because they are agressive but retain the OEM look. I've always been a proponent of the "Less is More" philosophy so the MKIV wheels are just what I want.
This is a post i got off the USA supra forum.
These are the 17's but they are the same width and offset so the 16's will fit. Let me know.

Attachment: mkiii with jza80 17's.jpg (Size: 11.17KB, Downloaded 391 time(s))

[Updated on: Fri, 09 July 2004 06:36]