Author | Topic |
Location: sydney
Registered: May 2004
|
600x300x76 FMIC (BRAND NEW!!!)
|
Sun, 18 July 2004 11:03
|
|
hey people..
i have a BRAND NEW polished hybrid design front mount intercooler..
domensions are 600 x 300 x 76, with 3" inlets and outlets..
never been installed!
Quote: | Features:
*Low price
*High efficiency
*low pressure drop 0.2psi at 15psi
*Strong Bar and plate design allow 80psi
|
price: $400 not negotiable.. need a quick sale..
places like "modyourcar" and "Xracing" sell these for around $430..
locates in Western sydney
thanks people!!
|
|
|
I supported Toymods
Location: Epping, Sydney
Registered: May 2002
|
Re: 600x300x76 FMIC (BRAND NEW!!!)
|
Sun, 18 July 2004 11:04
|
|
just as a matter of interest.... isn't low pressure drop a bad thing?
|
|
|
Location: Perth
Registered: May 2003
|
|
|
Location: Melbourne
Registered: May 2004
|
Re: 600x300x76 FMIC (BRAND NEW!!!)
|
Sun, 18 July 2004 23:04
|
|
If you get it to melbourne for $400 delivery inclusive, il take it!
|
|
|
Location: sydney
Registered: May 2004
|
Re: 600x300x76 FMIC (BRAND NEW!!!)
|
Mon, 19 July 2004 05:40
|
|
how much would it cost to get it sent to melbourne?
i dont think i would be interested.. but i guess it all depends..
and for the record... the lower the pressure drop, the better
BUMP!!
|
|
|
I supported Toymods
Location: Sydney
Registered: April 2004
|
Re: 600x300x76 FMIC (BRAND NEW!!!)
|
Mon, 19 July 2004 06:57
|
|
Umm i posses as stupid, but umm i didnt think these where worth much. What are these of? As in car. Whats difference from the square type one to the rectangle one?
|
|
|
Location: Sydney
Registered: July 2002
|
|
|
Location: Sydney
Registered: July 2002
|
Re: 600x300x76 FMIC (BRAND NEW!!!)
|
Mon, 19 July 2004 08:21
|
|
Postage to melbourne via australia post roughly $20.
|
|
|
Location: Canberra
Registered: May 2002
|
Re: 600x300x76 FMIC (BRAND NEW!!!)
|
Mon, 19 July 2004 09:26
|
|
Are you guys on drugs? This is a brand new bar & plate cooler that has proved itself in many aftermarket applications, and you're whining over 400 measly bucks? I'd snap it up myself if I hadn't bought the exact same type a month ago(for not nearly as good a price) I suppose you'd rather go buy a second hand GTR cooler for $600 because someone's mate who used to have a turbo charade told you they were the goods?
*free bump*
|
|
|
Location: Melbourne
Registered: May 2004
|
|
|
Location: sydney
Registered: May 2004
|
Re: 600x300x76 FMIC (BRAND NEW!!!)
|
Wed, 21 July 2004 06:18
|
|
Rallystanza wrote on Mon, 19 July 2004 19:27 | just nother thing dood, do the dimensions u provided include the end tanks, if not what is the entire size?
|
na, it doesnt include the end tanks.. and im not sure about the size with end tanks inclusive.. i think its around 880x300x76..
thanks for the words TE72_Turbo..
|
|
|
Location: Adelaide
Registered: May 2003
|
Re: 600x300x76 FMIC (BRAND NEW!!!)
|
Wed, 21 July 2004 08:30
|
|
these coolers are good, gtr coolers s/hand sell for more than $600 here!
|
|
|
"Cørønå reåk"
Location: Kellyville, Sydney
Registered: May 2002
|
Re: 600x300x76 FMIC (BRAND NEW!!!)
|
Wed, 21 July 2004 09:27
|
|
Thats a sweet cooler dude!
I'd buy it in a flash if I didn't already have one... but I can't remember if my one has 3 inch inlet/outlets..??
Good luck with the sale anyway...
|
|
|
Location: sunny coast, qld
Registered: October 2002
|
Re: 600x300x76 FMIC (BRAND NEW!!!)
|
Wed, 21 July 2004 09:48
|
|
I am another who would buy it at that price except it is too big for my car
|
|
|
Location: Melbourne
Registered: May 2004
|
Re: 600x300x76 FMIC (BRAND NEW!!!)
|
Thu, 22 July 2004 00:26
|
|
If its possible to get the dimensions of the cooler including the end tanks, then i can see if it will fit the sprintah and if so, il buy it!
|
|
|