Toymods Car Club Inc: Tech & Conversions => help for JE camira

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » help for JE camira Show: Today's Posts :: Show Polls Email to friend

Author

Topic

chrisss
Forums Junkie

Location:
melb
Registered:
May 2002

help for JE camira	Thu, 22 July 2004 13:08

for a friends car: need to check the temp sensor is working properly. guage always shows a low temp (it barely moves) , wanted to check the resistance v's temp. note there are two temp sensors on these motors, the gregories only has info for the ecu temp sensor not the one for the guage. if anyone can help that would be cool. [Report message to a moderator]

CrUZsida
Forums Junkie

I supported Toymods

Location:
Australia
Registered:
November 2003

Re: help for JE camira	Thu, 22 July 2004 22:59

There are usually 2 sensors, one for the ecu, one for the guage. The guage one is usually a single wire These may help http://oz-enet.com.au/~peewee/je.html http://oz-enet.com.au/~peewee/JE-5.GIF [Updated on: Fri, 23 July 2004 09:13] [Report message to a moderator]

chrisss
Forums Junkie

Location:
melb
Registered:
May 2002

Re: help for JE camira	Fri, 23 July 2004 08:52

yeah its the single wire sensor... what I really needed was a chart showing resistance v's temp.. those diagrams were good but not what I needed, thanx for trying tho. cheers [Report message to a moderator]

CrUZsida
Forums Junkie

I supported Toymods

Location:
Australia
Registered:
November 2003

Re: help for JE camira	Fri, 23 July 2004 09:12

You'll have to try a full repair manual Visit the local library or meausre it at stone cold, then light a match under it (remove it first) and see if the resistance changes [Report message to a moderator]

Previous Topic:	fuel pump location and how many filters
Next Topic:	ae86 4age conversion ( ecu wiring and fuel system) $$$$$sydney

Current Time: Sun Apr 28 17:06:00 UTC 2024

Total time taken to generate the page: 0.0035269260406494 seconds

.:: Contact :: Home ::.