| Author | Topic |
|---|
Location:
Sydney
Registered:
June 2004
|
|
TA22 feed fuel line
|
Tue, 20 July 2004 11:39
|
 |
Hi guys.
iv done a search and got to page 10 of 220 on fuel line threads and jsut couldnt look anymore so im just gonna ask
now i know the return line doesnt have to be changed from the threads i did read but what is a good sized fuel feed line i should get made for the car?
iv got a 3TGTEU in it
|
|
|
Registered:
November 2002
|
|
Re: TA22 feed fuel line
|
Tue, 20 July 2004 12:14
|
|
A 3T-GTE does not have any huge fuel demands on it in standard form so the original TA22 6mm fuel line should service it nicely. If you are keen to upgrade, fit a 8mm line to your car, and retain the existing 6mm return line.
|
|
|
Location:
Sydney
Registered:
June 2004
|
|
Re: TA22 feed fuel line
|
Tue, 20 July 2004 12:41
|
|
|
sweet thanks for that much appreciated
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: TA22 feed fuel line
|
Thu, 22 July 2004 09:55
|
|
Fade-e,
Just remember you need to use EFI hose clamps on ALL the rubber hoses, make sure you change the ones on your return line or it can weep/squirt fuel.
Fuel leaks and hot exhausts are a nasty combo !
|
|
|
Location:
Montrose, VIC
Registered:
May 2002
|
|
Re: TA22 feed fuel line
|
Thu, 22 July 2004 13:03
|
|
Yes - don't skimp on any of it, use new decent quality pipes/hoses/fittings on every part of the car, and replace everything. It's a pain in the arse, but well worth it when your car doesn't end up torching itself 
|
|
|
Location:
Sydney
Registered:
June 2004
|
|
Re: TA22 feed fuel line
|
Thu, 22 July 2004 14:09
|
|
ATM its running stock as a rock other than the haltech and 3"exhaust. that should be suffiecient for now shouldnt it?
also there are 2 fat mothers of a rubber hose on the current lines where the fuel pump is to fit, is that good enough?
|
|
|
Location:
Crapberra
Registered:
September 2003
|
|
Re: TA22 feed fuel line
|
Fri, 23 July 2004 04:57
|
|
| thetoyman75 wrote on Thu, 22 July 2004 19:55 |
Just remember you need to use EFI hose clamps on ALL the rubber hoses,
|
What is the diffence between a EFI hose clamp and a normal clamp. I'm hoping not a lot cause I'm just using normal ones... Eeeep
|
|
|
