| Author | Topic |
|---|
Location:
Sydney.au
Registered:
April 2004
|
|
Adjusting the idle on 4AGZE - AW11
|
Tue, 10 August 2004 11:59
|
 |
Hi all,
Just wondering where/how to adjust the idle on my 4AGZE, its sitting a little lower than I would like.
Any help is appreciated
|
|
|
Location:
Bundaberg, Qld.
Registered:
May 2002
|
|
Re: Adjusting the idle on 4AGZE - AW11
|
Tue, 10 August 2004 14:13
|
|
|
you'll find the idle adjustment screw above the TPS (to the left a bit) on the throttle body.
|
|
|
Location:
Newcastle
Registered:
June 2002
|
|
Re: Adjusting the idle on 4AGZE - AW11
|
Tue, 10 August 2004 14:48
|
|
|
Feral is right. Although it might have a little black cap over it! Adjustment screw is underneath...
|
|
|
Location:
Canberra
Registered:
May 2002
|
|
Re: Adjusting the idle on 4AGZE - AW11
|
Tue, 10 August 2004 22:10
|
|
I only worked this out myself recently.
If you want to set the idle speed properly, you really need a multimeter which measures duty cycle. Hook up your multimeter across the outside two wires on the ISC valve, then while the cars warm, adjust the idle bypass screw until the duty cycle on the ISC valve is pretty much at 50%. This way the computer has maximum capability for idle speed adjustment.
|
|
|
