Author | Topic |
Location: melb
Registered: March 2004
|
ae82 suspension into 86
|
Tue, 31 August 2004 05:08
|
|
hey guys i have just wrecked some of an ae82 and i found it had aftermarket springs on it and i was wondering if these springs will fit into my 86? front or rear?
thanks
sab
|
|
|
Registered: February 2003
|
Re: ae82 suspension into 86
|
Tue, 31 August 2004 05:19
|
|
just see if the spring diameter is not too far off and if the length of the front and rear are relatively the same. ie. put them next to each other and compare. I'm also wondering about this.
anyone done it?
|
|
|
I supported Toymods
Location: Perth, WA
Registered: May 2003
|
Re: ae82 suspension into 86
|
Tue, 31 August 2004 05:40
|
|
rears would not go
ae82 has irs and smaller diameter springs than what you need.
front struts wont go in.
ae82 is 4 bolt.
why dont you buy some king springs? not exactly a kings ransom
|
|
|
Location: Newcastle NSW
Registered: June 2002
|
Re: ae82 suspension into 86
|
Tue, 31 August 2004 08:27
|
|
as ae95 said get some new aftermarket springs K-MAC does custom heights and last time i checked were around $300 a set of 4.
definately worrthwhile if you want your car to sit level
|
|
|
Location: melb
Registered: March 2004
|
Re: ae82 suspension into 86
|
Wed, 01 September 2004 08:52
|
|
i would get sum kingies but i'm really low on cash atm and the springs are just sitting there and i would rather use them then sell them. since they are not kingies they wont go for more the 50 bucks for all 4 so i thought it would be a much better improvement on the 86 then the stock suspension. so the fron springs will fit? i'm just putting the springs in not the whole strut. so front will fit and not rear?
thanks sab
|
|
|
I supported Toymods
Location: Perth, WA
Registered: May 2003
|
Re: ae82 suspension into 86
|
Wed, 01 September 2004 09:11
|
|
dont know
check it out for yourself
|
|
|
I supported Toymods
Location: Perth, WA
Registered: May 2003
|
Re: ae82 suspension into 86
|
Wed, 01 September 2004 09:11
|
|
but the back definately wont fit since ae86 uses big diamter springs compared to the small diameter ae82 ones
|
|
|
Location: Newcastle NSW
Registered: June 2002
|
Re: ae82 suspension into 86
|
Wed, 01 September 2004 10:02
|
|
if you want to lower your car cheaply. go to a pick n payless or similar wrecker pull some springs out of a much bigger car with the same diameter springs and then cut to suit your desired ride height wouldnt cost more than $100 including hacksaw blades
|
|
|
Location: melb
Registered: March 2004
|
Re: ae82 suspension into 86
|
Wed, 01 September 2004 11:51
|
|
hahaha thats ghetto man, i dont wanna chop springs. i didnt want to lower my car at all. i wanted to make it stiffer to obtain higher handeling capabilities. but looks like i will have no luck with these 82 springs. oh yeah just a question. i know the 86 has a live axle but is it possible at all to customize rear coil overs for the rear? or is there a kit for rear coilovers? and why cant you have irs on a live axle?
thanks guyz
sab
|
|
|
I supported Toymods
Location: Perth, WA
Registered: May 2003
|
Re: ae82 suspension into 86
|
Wed, 01 September 2004 12:12
|
|
yes u can put custom coilovers on the rear. would be a wise to add extra support tho the shock mount tho.
irs and live axles are completely different designs. if u look at each setup u will soon realise the answer.
i have heard some rally guys bend the housing slight amounts to get some camber. other than that all solid/live axles have static camber ie. zero
|
|
|
Location: cambo
Registered: May 2002
|
Re: ae82 suspension into 86
|
Wed, 01 September 2004 12:27
|
|
mate you are much confused on what live axle and irs mean. your too tight to spend some money on stiffer springs but now your talking about rear coilovers? stiffer springs wont necessarily give you better handling anyway.
if you want better handling, you can always add a second stock rear sway bar as sprinters usually have a bit of understeer. just get one from a wrecker, prob no more than $10 and fasten it to the one on your car. sounds dodgy (cause it is) but it works.
|
|
|
Location: melb
Registered: March 2004
|
Re: ae82 suspension into 86
|
Wed, 01 September 2004 13:37
|
|
yeah sorry for my ignorance. i'm still un educated when it comes to suspension. i have no intention of buying coilovers for my car. i was just confused about how the suspension works on a live axle. cos i was looking at my 86 and i was trippin on why the spring ans shock are seperate. anyways more reading for me
thanks for the help guyz
sab
|
|
|
Location: Newcastle NSW
Registered: June 2002
|
Re: ae82 suspension into 86
|
Thu, 02 September 2004 12:35
|
|
cutting heavier springs isnt dodgey! as long as its cut cold then theres no problems with doing so. you dont need to cut them if they sit your car at a desired height and are stiffer. but that is a rare find to retrofit springs like that without needing a cut.
sell the ae82 springs and use the procedes to fund some other springs from a wrecker.
dont quote me but i am lead to believe some falcon springs are the same diameter as AE86 rears and are designed to hold up a car weighing almost twice what yours weighs. you want stiffer!!
|
|
|